Brayton refrigeration cycle for gas turbine inlet air cooling

In this paper, a new approach to enhance the performance of gas turbines operating in hot climates is investigated. Cooling the intake air at the compressor bell mouth is achieved by an air Brayton refrigerator (reverse Joule Brayton cycle) driven by the gas turbine and uses air as the working fluid. Fraction of the air is extracted from the compressor at an intermediate pressure, cooled and then expands to obtain a cold air stream, which mixes with the ambient intake. Mass and energy balance analysis of the gas turbine and the coupled Brayton refrigerator are performed. Relationships are derived for a simple open gas turbine coupled to Brayton refrigeration cycle, the heat rejected from the cooling cycle can be utilized by an industrial process such as a desalination plant. The performance improvement in terms of power gain ratio (PGR) and thermal efficiency change (TEC) factor is calculated. The results show that for fixed pressure ratio and ambient conditions, power and efficiency improvements are functions of the extraction pressure ratio and the fraction of mass extracted from the air compressor. The performance improvement is calculated for ambient temperature of 45 degrees C and 43.4% relative humidity. The results indicated that the intake temperature could be lowered below the ISO standard with power increase up to 19.58% and appreciable decrease in the thermal efficiency (5.76% of the site value). Additionally, the present approach improved both power gain and thermal efficiency factors if air is extracted at 2 bar which is unlike all other mechanical chilling methods. Copyright (C) 2007 John Wiley & Sons, Ltd.