Testing the Bergerhoff method to determine the bulk deposition loads of 49 elements

The suitability of the simple and rather cheap Bergerhoff method for the determination of bulk deposition loads of 49 elements was tested. The method is suitable for the following elements: Ag, Al, As, Ba, Be, Bi, Ca, Cd, Ce, Co, Cr, Cs, Cu, Fe, Ga, Ge, In, K, La, Li, Mg, Mn, Mo, Na, Nb, Ni, Pb, Rb, S, Sb, Sc, Se, Sn, Sr, Th, Ti, Tl, V, W, Y and Zn provided that for some of these elements one does not get total recovery with HNO3-digestion. This, nevertheless, supplies sufficient information for most concerns. Analytical problems were encountered for the following elements: U and Te concentrations in our samples were close to the blanks; P and Ta were highly variable within the sampling areas; B, Hf and Zr leached out of the glass of the digestion vessels; Hg is highly volatile. Field studies at three background sites in Switzerland, two on the northern side of the Alps and one in the southern Alps, showed higher burdens of element emissions in the latter, partly because of higher precipitation, and partly because of higher concentrations in the dust. An anthropogenic influence can be inferred for Ag, Bi, Cd, Cu, Hg, Mo, Pb, Sb, Te, W and Zn and probably also for As, P, S (with associated Se) and Sn. (C) 1998 Elsevier Science Ltd. All rights reserved.