Thermal transient characteristics of die attach in high power LED PKG

The reliability of packaged electronics strongly depends on the die attach quality because any void or a small delamination may cause instant temperature increase in the die, leading sooner or later to failure in the operation. Die attach materials have a key role in the thermal management of high power LED packages by providing the low thermal resistance between the heat generating LED chips and the heat dissipating heat slug. In this paper, thermal transient characteristics of die attach in high power LED PKG have been studied based on the thermal transient analysis using the evaluation of the structure function of the heat flow path. With high power LED packages fabricated by die attach materials such as Ag paste, solder paste and Au/Sn eutectic bonding, we have demonstrated for characteristics such as cross-section analysis, shear test and visual inspection after shear test of die attach and how to detect die attach failures and to measure thermal resistance values of die attach in high power LED PKG From the differential structure function of the thermal transient characteristics, we could know the result that die attach quality of Au/Sn eutectic bonding with the thermal resistance of about 3.5 K/W was much better than this of Ag paste and solder paste with the thermal resistance of about 11.5-14.2 K/W and 4.4-4.6 K/W, respectively. From this results, it is possible to fabricate high power LED with a small thermal resistance and a good die attach quality by applying Au/Sn eutectic bonding die attach with a high reliability and a good repeatability. (C) 2007 Elsevier Ltd. All rights reserved.