EDTA extraction of heavy metals from different soil fractions and synthetic soils

A laboratory-prepared contaminated soil was partitioned into four fractions, namely carbonate, Fe/Mn oxides, organic matter and clay mineral, according to the form in which the heavy metal bound with soil constituents. Individual contaminated soil fractions and synthetic soils were prepared for the study of soil extraction using ethylenediaminetetraacetic acid (EDTA). The effect of contact time and EDTA concentration were evaluated for both individual soil fractions and synthetic soils. The extraction reached equilibrium rapidly, after about 30 min. A 0.01 M EDTA solution was less effective than a 0.05 M or a 0.10 M EDTA. EDTA was proved to be effective for metal removal from the four individual soil fractions and synthetic soils. In general, approximately 90% of metals were removed from synthetic soils by 0.10 M EDTA. EDTA extraction of Pb from a contaminated carbonate fraction was thought to be affected by the formation of lead carbonates. A simple equation based on the sum of the released heavy metal from the individual components is used to check if there are interactions among the different soil components when mixed. The estimated values agreed well with the experimentally measured results only for the 0.10 M EDTA system.