Analytical modeling of force system in ball-end milling

被引：17

作者：

Lazoglu, I ^{[1
]}

Liang, SY ^{[1
]}

机构：

[1] Georgia Inst Technol, George W Woodruff Sch Mech Engn, Atlanta, GA 30332 USA

来源：

MACHINING SCIENCE AND TECHNOLOGY | 1997年 / 1卷 / 02期

关键词：

D O I：

10.1080/10940349708945648

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper establishes an analytical expression for dynamic cutting forces involved in machining with multiflute ball-end cutters. The expression is given in explicit terms of cutting parameters, tool-workpiece geometry, and machining configuration. A model of this nature can assist in the planning of machining operations, the design of machine tool components, the optimization of cutting parameters, and the monitoring/control of process parameters. The concept involved in this model is the mathematical characterization of the cutter-workpiece interaction in terms of the chip width density function in an angular convolution form. This characterization allows the dynamic cutting forces to be algebraically represented in the frequency domain. The analytical development of the model is discussed and the experimental verification presented.

引用

页码：219 / 234

页数：16

共 12 条

[1]

ALTINTAS Y, 1995, ASME INT MECH ENG C, P657

[2] Prediction of milling force coefficients from orthogonal cutting data [J].

Budak, E ;

Altintas, Y ;

Armarego, EJA .

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 1996, 118 (02) :216-224

[3] THE PREDICTION OF CUTTING FORCES IN THE BALL-END MILLING PROCESS .1. MODEL FORMULATION AND MODEL-BUILDING PROCEDURE [J].

FENG, HY ;

MENQ, CH .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1994, 34 (05) :697-710

[4] THE PREDICTION OF CUTTING FORCES IN THE BALL-END MILLING PROCESS .2. CUT GEOMETRY ANALYSIS AND MODEL VERIFICATION [J].

FENG, HY ;

MENQ, CH .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1994, 34 (05) :711-719

[5]

Koenigsberger F., 1961, INT J MACH TOOL MANU, V1, P15, DOI DOI 10.1016/0020-7357(61)90041-5

[6] Prediction of ball-end milling forces from orthogonal cutting data [J].

Lee, P ;

Altintas, Y .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1996, 36 (09) :1059-1072

[7]

Martellotti M.E., 1945, T AM SOC MECH ENG, V67, P233, DOI 10.1115/1.4018229

[8] Chatter stability analysis for end milling via convolution modelling [J].

Shorr, MJ ;

Liang, SY .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 1996, 11 (05) :311-318

[9] THE PREDICTION OF THE CUTTING FORCE IN BALL-END MILLING WITH A FLEXIBLE CUTTER [J].

SIM, C ;

YANG, M .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1993, 33 (02) :267-284

[10]

WANG JJJ, 1994, J ENG IND-T ASME, V116, P17, DOI 10.1115/1.2901804

← 1 2 →