Passive direct methanol fuel cells for portable electronic devices

被引:134
作者
Achmad, F. [1 ]
Kamarudin, S. K. [1 ,2 ]
Daud, W. R. W. [1 ]
Majlan, E. H. [1 ]
机构
[1] Univ Kebangsaan Malaysia, Fuel Cell Inst, Ukm Bangi 43600, Selangor, Malaysia
[2] Univ Kebangsaan Malaysia, Dept Chem & Proc Engn, Ukm Bangi 43600, Selangor, Malaysia
关键词
Direct methanol fuel cell; Electronic devices; Renewable energy; MEMBRANE THICKNESS; DMFC; PERFORMANCE; STACK;
D O I
10.1016/j.apenergy.2010.11.012
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
080707 [能源环境工程]; 082001 [油气井工程];
摘要
Due to the increasing demand for electricity, clean, renewable energy resources must be developed. Thus, the objective of the present study was to develop a passive direct methanol fuel cell (DMFC) for portable electronic devices. The power output of six dual DMFCs connected in series with an active area of 4 cm(2) was approximately 600 mW, and the power density of the DMFCs was 25 mW cm(-2). The DMFCs were evaluated as a power source for mobile phone chargers and media players. The results indicated that the open circuit voltage of the DMFC was between 6.0 V and 6.5 V, and the voltage under operating conditions was 4.0 V. The fuel cell was tested on a variety of cell phone chargers, media players and PDAs. The cost of energy consumption by the proposed DMFC was estimated to be USD 20 W-1, and the cost of methanol is USD 4 kW h. Alternatively, the local conventional electricity tariff is USD 2 kW h. However, for the large-scale production of electronic devices, the cost of methanol will be significantly lower. Moreover, the electricity tariff is expected to increase due to the constraints of fossil fuel resources and pollution. As a result. DMFCs will become competitive with conventional power sources. (C) 2010 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1681 / 1689
页数:9
相关论文
共 27 条
[1]
Factors affecting methanol transport in a passive DMFC employing a porous carbon plate [J].
Abdelkareem, Mohammad Ali ;
Morohashi, Nobuto ;
Nakagawa, Nobuyoshi .
JOURNAL OF POWER SOURCES, 2007, 172 (02) :659-665
[2]
Optimization of properties and operating parameters of a passive DMFC mini-stack at ambient temperature [J].
Baglio, V. ;
Stassi, A. ;
Matera, F. V. ;
Di Blasi, A. ;
Antonucci, V. ;
Arico, A. S. .
JOURNAL OF POWER SOURCES, 2008, 180 (02) :797-802
[3]
Li-ion batteries and portable power source prospects for the next 5-10 years [J].
Broussely, M ;
Archdale, G .
JOURNAL OF POWER SOURCES, 2004, 136 (02) :386-394
[4]
A small mono-polar direct methanol fuel cell stack with passive operation [J].
Chan, Y. H. ;
Zhao, T. S. ;
Chen, R. ;
Xu, C. .
JOURNAL OF POWER SOURCES, 2008, 178 (01) :118-124
[5]
Performance characterization of passive direct methanol fuel cells [J].
Chen, R. ;
Zhao, T. S. .
JOURNAL OF POWER SOURCES, 2007, 167 (02) :455-460
[6]
CIFRE PG, RENEWABLE HYDROGEN U
[7]
Development of materials for mini DMFC working at room temperature for portable applications [J].
Coutanceau, C. ;
Koffi, R. K. ;
Leger, J. -M. ;
Marestin, K. ;
Mercier, R. ;
Nayoze, C. ;
Capron, P. .
JOURNAL OF POWER SOURCES, 2006, 160 (01) :334-339
[8]
Effect of current collector corrosion made from printed circuit board (PCB) on the degradation of self-breathing direct methanol fuel cell stack [J].
Guo, Jian-Wei ;
Xie, Xiao-Feng ;
Wang, Jin-Hai ;
Shang, Yu-Ming .
ELECTROCHIMICA ACTA, 2008, 53 (07) :3056-3064
[9]
Miniature DMFCs with passive thermal-fluids management system [J].
Guo, Zhen ;
Faghri, Amir .
JOURNAL OF POWER SOURCES, 2006, 160 (02) :1142-1155
[10]
Design, fabrication and testing of a PMMA-based passive single-cell and a multi-cell stack micro-DMFC [J].
Hashim, N. ;
Kamarudin, S. K. ;
Daud, W. R. W. .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2009, 34 (19) :8263-8269