Application of response surface methodology and central composite design for the optimisation of supercritical fluid extraction of essential oils from Myrtus communis L. leaves

Essential oils of Myrtus communis L. leaves were obtained using supercritical fluid extraction (SFE) and hydrodistillation methods. The experimental parameters of SFE such as pressure, temperature, modifier volume, static and dynamic extraction time were optimised using a central composite design after a 2(n-1) fractional factorial design. The chemical compositions of the SFE extract were identified by GC-MS and determined by GC-FID. The major components of essential oils obtained by hydrodistillation were alpha-pinene (31.8%), 1,8-cineole (24.6%), limonene (14.8%), linalool (8.3%) and alpha-terpinolene (4.8%). However, by using the supercritical carbon dioxide in optimum conditions, only three components represented more than 85% of the extract. Therefore, by using the proper SFE conditions, the supercritical extraction is more selective than the conventional hydrodistillation methods. The oil yields based on the hydrodistillation was 0.47% (v/w). Extraction yields based on the SFE varied in the range of 0.5-6.3% (w/w) under different conditions. (C) 2010 Elsevier Ltd. All rights reserved.