Photochemically reactive polymers.: Identification of the products formed in the photochemical degradation of polyurethanes that contain (C5H4R)(CO)3Mo-Mo(CO)3(C5H4R) units along their backbones

被引:5
作者
Chen, R [1 ]
Meloy, J [1 ]
Daglen, BC [1 ]
Tyler, DR [1 ]
机构
[1] Univ Oregon, Dept Chem, Eugene, OR 97403 USA
关键词
D O I
10.1021/om049268f
中图分类号
O61 [无机化学];
学科分类号
070301 ; 081704 ;
摘要
A photochemically degradable polyurethane with Mo-Mo bonds along its backbone (I) was synthesized by reacting the isocyanate-capped poly(ethylene glycol) prepolymer Hypol 2000 with the Mo-Mo-bond-containing diol (eta(5)-C5H4CH2CH2OH)(2)Mo-2(CO)(6). A copolymer (II) that contained poly(ethylene glycol) in addition to Hypol 2000 and (eta(5)-C5H4CH2CH2OH)(2)Mo-2(CO)(6) was also synthesized. The backbones of both polymers can be photochemically cleaved, because the Mo-Mo bonds homolyze when irradiated with visible light. A net photochemical reaction only occurs in the presence of a radical trap, such as oxygen in the air; no net photochemical reaction occurs in the absence of radical trap. X-ray photoelectron spectroscopy shows that the Mo oxidizes during the photochemical reaction in air, initially to Mo(V) and then to Mo(VI). Both products are likely oxide species. Infrared spectroscopy confirms the release of CO when the polymers are irradiated. A polyurethane copolymer (III) that photochemically degrades in the absence of oxygen was synthesized by reacting (eta(5)-C(5)H(4)GH(9)CH(2)OH)(2)Mo-2(CO)(6) and 1,4-butanediol with tolylene 2,4-diisocyanate terminated poly(propylene glycol) and 1-(chloromethyl)-2,4-diisocyanatobenzene. The Cl atoms are readily abstracted by the photochemically generated Mo radicals, and this polymer readily degrades when irradiated in the absence of air. Despite the relatively low concentration of Cl in this polymer, the quantum yield for photodegradation is remarkably high (0.35). Other polymers with much higher concentrations of Cl trap are less reactive, and it is concluded that T-g is an important parameter in determining the efficiency of photochemical degradation. It is proposed that because chain motion occurs above T-g, the radical trapping reaction is more facile, resulting in more net reaction.
引用
收藏
页码:1495 / 1500
页数:6
相关论文
共 26 条
[1]  
ALLEN NS, 2003, PHOTOCHEMISTRY, V34, P197
[2]  
[Anonymous], 1987, MECH PHOTOPHYSICAL P
[3]   Investigation of the origin of tensile stress-induced rate enhancements in the photochemical degradation of polymers [J].
Chen, R ;
Yoon, M ;
Smalley, A ;
Johnson, DC ;
Tyler, DR .
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, 2004, 126 (10) :3054-3055
[4]   Origin of tensile stress-induced rate increases in the photochemical degradation of polymers [J].
Chen, R ;
Tyler, DR .
MACROMOLECULES, 2004, 37 (14) :5430-5436
[5]  
Geuskens G., 1975, COMPREHENSIVE CHEM K, P333, DOI DOI 10.1016/S0069-8040(08)70335-2
[6]   FERROCENE-CONTAINING POLYAMIDES AND POLYUREAS [J].
GONSALVES, K ;
LIN, ZR ;
RAUSCH, MD .
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, 1984, 106 (13) :3862-3863
[7]  
Gonsalves K. E., 1987, APPL ORGANOMET CHEM, V1, P81
[8]   COMPETITIVE AMIDATION OF SEBACOYL CHLORIDE WITH MIXTURES OF HEXAMETHYLENEDIAMINE AND 1,1'-BIS(BETA-AMINOETHYL) FERROCENE [J].
GONSALVES, KE ;
RAUSCH, MD .
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY, 1988, 26 (10) :2769-2775
[9]  
Grassie N., 1985, POLYM DEGRADATION ST
[10]  
Guillet J.E., 1985, POLYM PHOTOPHYSICS P