The effect of MO2C synthesis and pretreatment on catalytic stability in oxidative reforming environments

被引:56
作者
LaMont, DC [1 ]
Gilligan, AJ [1 ]
Darujati, ARS [1 ]
Chellappa, AS [1 ]
Thomson, WJ [1 ]
机构
[1] Washington State Univ, Dept Chem Engn, Pullman, WA 99164 USA
关键词
molybdenum carbide; dry methane reforming; excess carbon; pretreatment; oxidation; stability; TPR; solution synthesis; dynamic X-ray diffraction;
D O I
10.1016/S0926-860X(03)00567-2
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
The role of catalyst pretreatment on the stability of Mo2C catalysts in oxidative reforming environments has been studied. Catalysts were produced by both the temperature programmed reaction (TPR) and a solution-derived (SD) synthesis method, and compared to a low surface area commercial catalyst. Using a variety of techniques, including in situ dynamic X-ray diffraction (DXRD), the effects of various hydrogen pretreatment protocols were evaluated, including catalyst thermal stability, oxidation resistance and susceptibility to coking. The high surface areas produced by the SD synthesis is attributed to the presence of excess synthesis carbon and, whereas the presence of excess synthesis carbon enhances thermal stability, it also appears to accelerate coking. It is pointed out that the lowered oxidation resistance of the high surface area catalysts is due to a combination of smaller crystallite sizes and competitive oxidation of the excess synthesis carbon, which alters the oxidation mechanism. In addition, it was also found that incomplete carburization during TPR synthesis, forms an oxycarbide and its acidity also promotes coking. Hydrogen pretreatment at 700 degreesC not only removes all excess synthesis carbon, but it also reduces the oxycarbide to Mo, which is easily carburized under reforming conditions. Pretreatment at 600 degreesC, was largely ineffective and it is concluded that high temperature pretreatment is necessary to form the stoichiometric carbide, which is required for stability during reforming. Both the TPR and SD catalysts pretreated at 700 degreesC, were found to be stable over a 72 h period, whereas the commercial carbide had almost identical activity but slowly deactivated over the same period, probably because of its low surface area. Finally, labeled isotope experiments revealed that carbon exchange occurs readily with bulk Mo2C at temperatures above 550degreesC, lending credence to a reforming redox mechanism. (C) 2003 Elsevier B.V All rights reserved.
引用
收藏
页码:239 / 253
页数:15
相关论文
共 38 条
[1]   Thiophene hydrodesulfurization over alumina-supported molybdenum carbide and nitride catalysts: Adsorption sites, catalytic activities, and nature of the active surface [J].
Aegerter, PA ;
Quigley, WWC ;
Simpson, GJ ;
Ziegler, DD ;
Logan, JW ;
McCrea, KR ;
Glazier, S ;
Bussell, ME .
JOURNAL OF CATALYSIS, 1996, 164 (01) :109-121
[2]   ELECTRONIC AND CATALYTIC PROPERTIES OF REFRACTORY HARD METALS [J].
BENNETT, LH ;
MCALISTER, AJ ;
CUTHILL, JR ;
ERICKSON, NE ;
WATSON, RE .
JOURNAL OF MOLECULAR CATALYSIS, 1977, 2 (03) :203-209
[3]   Microstructure and characterization of a highly selective catalyst for the isomerization of alkanes: A molybdenum oxycarbide [J].
Bouchy, C ;
Pham-Huu, C ;
Heinrich, B ;
Chaumont, C ;
Ledoux, MJ .
JOURNAL OF CATALYSIS, 2000, 190 (01) :92-103
[4]   Comparison of the group V and VI transition metal carbides for methane dry reforming and thermodynamic prediction of their relative stabilities [J].
Brungs, AJ ;
York, APE ;
Green, MLH .
CATALYSIS LETTERS, 1999, 57 (1-2) :65-69
[5]   PYRIDINE HYDRODENITROGENATION OVER MOLYBDENUM CARBIDE CATALYSTS [J].
CHOI, JG ;
BRENNER, JR ;
THOMPSON, LT .
JOURNAL OF CATALYSIS, 1995, 154 (01) :33-40
[6]   New catalysts for the conversion of methane to synthesis gas: Molybdenum and tungsten carbide [J].
Claridge, JB ;
York, APE ;
Brungs, AJ ;
Marquez-Alvarez, C ;
Sloan, J ;
Tsang, SC ;
Green, MLH .
JOURNAL OF CATALYSIS, 1998, 180 (01) :85-100
[7]   Study of the temperature-programmed reaction synthesis of early transition metal carbide and nitride catalyst materials from oxide precursors [J].
Claridge, JB ;
York, APE ;
Brungs, AJ ;
Green, MLH .
CHEMISTRY OF MATERIALS, 2000, 12 (01) :132-142
[8]  
DARUJATI ARS, 2003, UNPUB APPL CATAL
[9]   Hydrotreatment activities of supported molybdenum nitrides and carbides [J].
Dolce, GM ;
Savage, PE ;
Thompson, LT .
ENERGY & FUELS, 1997, 11 (03) :668-675
[10]   Study on the structure and formation mechanism of molybdenum carbides [J].
Hanif, A ;
Xiao, TC ;
York, APE ;
Sloan, J ;
Green, MLH .
CHEMISTRY OF MATERIALS, 2002, 14 (03) :1009-1015