High speed threading of inclusion-modified steels with coated carbide tools

This paper evaluates the performance of TiN and Al2O3 single layer coated cemented carbide tools when threading inclusion-modified 708M40T (En 19T) and 817M40T (En 24T) steels at high cutting conditions. Tool wear, failure modes, post-threading workpiece properties, micro- and macro-surface alterations and sub-surface microhardness variation after threading were monitored and used to assess the performance of the threading tools. Results of the threading show that flank wear was the dominant failure mode and tended to increase rapidly when machining at the top speed of 225 m min(-1) due to the high temperature generated, which accelerates thermally-related wear mechanisms. The Al2O3 coated carbide inserts with K05-K20 substrate generally performed better than TiN coated grade with P20-P30 substrates, under the cutting conditions investigated, because of their superior hardness, density, transverse rupture strength as well as unalloyed WC fine grained substrate (1 mu m) in addition to the high hot hardness, excellent chemical stability and low thermal conductivity of the Al2O3 coating at elevated temperatures. An equation for tool rejection was also developed during this study based on the average flank wear (VBb) and growth in thread root (GTR), to establish a scientific basis for assessing the wear of threading tools. (C) 1999 Elsevier Science S.A. All rights reserved.