Preparation of α-Fe2O3 submicro-flowers by a hydrothermal approach and their electrochemical performance in lithium-ion batteries

被引:90
作者
NuLi, Yanna [1 ,2 ]
Zhang, Peno [1 ]
Guo, Zaiping [1 ]
Munroe, P. [3 ]
Liu, Huakun [1 ]
机构
[1] Univ Wollongong, Inst Superconducting & Elect Mat, Wollongong, NSW 2522, Australia
[2] Shanghai Jiao Tong Univ, Dept Chem Engn, Shanghai 200240, Peoples R China
[3] Univ New S Wales, Electron Microscope Unit, Sydney, NSW 2052, Australia
基金
澳大利亚研究理事会;
关键词
iron oxide; hydrothermal method; submicro-flowers; anode materials; lithium-ion batteries;
D O I
10.1016/j.electacta.2007.12.067
中图分类号
O646 [电化学、电解、磁化学];
学科分类号
081704 ;
摘要
Uniform alpha-Fe2O3 submicron-sized flowers have been synthesized by a simple hydrothermal process conducted at 160 degrees C for 024 h. The crystalline structure and morphology of the as-synthesized powder have been characterized by using X-ray powder diffraction (XRD), scanning electron microscopy (SEM), and field emission scanning electron microscopy (FE-SEM). The results revealed that the highly crystalline alpha-Fe2O3 submicro-flowers were composed of nanospheres with an average size of 20-30 nm. The electrochemical performance as anode material for lithium-ion batteries was further evaluated by Cyclic voltammetry (CV) and by electrochemical impedance and charge-discharge measurements. It was demonstrated that the material could provide an initial reversible capacity of 959.6 mAh/g at a current density of 20 mA/g over the voltage range from 0.0 1 to 3.0 V. The capacity retention upon the 50th cycle was 44.4 and 35.9% at 60 and 100 mA/g, respectively. The superior electrochemical performance may be resulted from the high surface area and the small and uniform grain size. (c) 2008 Elsevier Ltd. All rights reserved.
引用
收藏
页码:4213 / 4218
页数:6
相关论文
共 36 条
[1]   Ultrafine titania by flame spray pyrolysis of a titanatrane complex [J].
Bickmore, CR ;
Waldner, KF ;
Baranwal, R ;
Hinklin, T ;
Treadwell, DR ;
Laine, RM .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 1998, 18 (04) :287-297
[2]  
BURUKHIN AA, 2001, P JOINT 6 INT S HYDR
[3]   Hydrothermal technology for nanotechnology [J].
Byrappa, K. ;
Adschiri, T. .
PROGRESS IN CRYSTAL GROWTH AND CHARACTERIZATION OF MATERIALS, 2007, 53 (02) :117-166
[4]   α-Fe2O3 nanotubes in gas sensor and lithium-ion battery applications [J].
Chen, J ;
Xu, LN ;
Li, WY ;
Gou, XL .
ADVANCED MATERIALS, 2005, 17 (05) :582-+
[5]   Nanocrystalline and metastable phase formation in vacuum thermal decomposition of calcium carbonate [J].
Dash, S ;
Kamruddin, M ;
Ajikumar, PK ;
Tyagi, AK ;
Raj, B .
THERMOCHIMICA ACTA, 2000, 363 (1-2) :129-135
[6]   The preparation of calcium carbonate in an emulsified liquid membrane [J].
Davey, RJ ;
Hirai, T .
JOURNAL OF CRYSTAL GROWTH, 1997, 171 (1-2) :318-320
[7]  
DONG DC, 1995, MATER RES BULL, V30, P531, DOI 10.1016/0025-5408(95)00031-3
[8]   Use of ethylene oxide in the sol-gel synthesis of α-Fe2O3 nanoparticles from Fe(III) salts [J].
Dong, WT ;
Zhu, CS .
JOURNAL OF MATERIALS CHEMISTRY, 2002, 12 (06) :1676-1683
[9]   Preparation of α-Fe2O3 nanoparticles by sol-gel process with inorganic iron salt [J].
Dong, WT ;
Wu, SX ;
Chen, DP ;
Jiang, XW ;
Zhu, CS .
CHEMISTRY LETTERS, 2000, (05) :496-497
[10]   PREPARATION OF ULTRAFINE ALUMINA POWDERS BY PLASMA EVAPORATION [J].
EVEREST, DA ;
SAYCE, IG ;
SELTON, B .
JOURNAL OF MATERIALS SCIENCE, 1971, 6 (03) :218-&