Effect of feed melting, temperature history, and minor component addition on spinel crystallization in high-level waste glass

被引:46
作者
Izak, P [1 ]
Hrma, P [1 ]
Arey, BW [1 ]
Plaisted, TJ [1 ]
机构
[1] Pacific NW Natl Lab, Richland, WA 99352 USA
关键词
D O I
10.1016/S0022-3093(01)00705-0
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 [材料科学与工程]; 080502 [材料学];
摘要
Spinet crystallization affects the anticipated cost and risk of high-level waste (HLW) vitrification. Spinet, (Fe, Ni) (Fe, Cr)(2)O-4, is the primary crystalline phase that precipitates from melts containing oxides of Fe, Ni, and Cr in sufficient concentrations. This study was undertaken to help design and verify mathematical models for a HLW glass melter in which spinet crystals precipitate and partially settle. To study melting reactions, we used a simulated HLW feed, prepared with co-precipitated Fe, Ni, Cr, and Mn hydroxides. Feed samples were heated up at a temperature-increase rate presumed to be close to that which the feed experiences in the HLW glass melter. The decomposition, melting, and dissolution of feed components (such as nitrates, carbonates, and quartz) and the formation of intermediate crystalline phases (spinet, sodalite, and Zr-containing minerals) were characterized using evolved gas analysis, vol-arne-expansion measurement, optical microscopy, scanning electron microscopy (SEM), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and X-ray diffraction (XRD). Nitrates and quartz, the major feed components, converted to a glass-forming melt by 880 degreesC. A nearly chron-dum-free primary spinet formed in the nitrate melt starting from 520 degreesC and eventually dissolved in the borosilicate melt by 1060 degreesC. Sodalite, a transient product of corundum dissolution, appeared above 600 degreesC and eventually dissolved in glass. To investigate the effects of temperature history and minor components (Ru, Ag, and Cu) on the dissolution and growth of spinet crystals, samples were heated up to temperatures below or above liquidus temperature (TL) and then subjected to different (constant or cyclic) temperature histories and analyzed. The results show that the mass fraction of spinet as well as the composition and size of crystals depend on the chemical and physical makeup of the feed and the temperature history. Small crystals result from either preventing the primary spinet from dissolving in the glass-forming melt or from the presence of nucleation agents, such as RuO2 (additions of 0.06 mass% Ag2O and 0.06 mass% CuO did not help nucleate spinet). Cyclic temperature histories with the maximum temperature above TL and minimum temperature below TL kept spinet concentration far below the equilibrium concentration, especially when a nucleation agent was absent. (C) 2001 Elsevier Science B.V. All rights reserved.
引用
收藏
页码:17 / 29
页数:13
相关论文
共 26 条
[1]
ALTON J, IN PRESS MODELING KI
[2]
Anderson L. D., 1994, CERAM T, V39, P213
[3]
BADER E, 1983, SILIKATTECHNIK, V34, P7
[4]
REDOX CONTROL OF ELECTRIC MELTERS WITH COMPLEX FEED COMPOSITIONS .1. ANALYTICAL METHODS AND MODELS [J].
BICKFORD, DF ;
DIEMER, RB .
JOURNAL OF NON-CRYSTALLINE SOLIDS, 1986, 84 (1-3) :276-284
[5]
Behavior of simulated Hanford slurries during conversion to glass [J].
Darab, JG ;
Meiers, EM ;
Smith, PA .
SCIENTIFIC BASIS FOR NUCLEAR WASTE MANAGEMENT XXII, 1999, 556 :215-222
[6]
HRMA D, 1986, J NONCRYST SOLIDS, V84, P370
[7]
Hrma P., 1996, CERAM T, V72, P449
[8]
HRMA P, 2001, WASTE MANAGEMENT 01
[9]
HRMA P, 2000, MAT RES SOC P, V608, P671
[10]
HRMA P, 1996, VITRIFICATION HIGH L