CuInSe2 thin film preparation through a new selenisation process using chemical bath deposited selenium

Copper indium selenide thin films were prepared through a novel and an eco-friendly selenisation process. In this method, selenium film required for selenisation was prepared using chemical bath deposition technique, at room temperature. Thus, totally avoided usage of highly toxic H2Se or selenium vapour. Here, the process involved annealing the Stacked layer, Se/In/Cu in which Cu and In were deposited using vacuum evaporation technique. Investigations on the solid-state reaction between the layers were done by analysing structural and optical properties of films formed at different annealing temperatures. Optimum annealing condition for the formation of copper indium selenide thin film was found to be 673 K for 1 h in high vacuum. Compositional dependence of the growth process was also studied using various Cu/In ratios. Optical band gap was decreased with increase in Cu/In ratio. Carrier concentration and hence conductivity were found to be increased with increase in Cu/In ratio. The films obtained were p-type and highly Cu-rich films were degenerate. (C) 2002 Elsevier Science B.V. All rights reserved.