Structural and performance study of microporous polyetherimide hollow fiber membranes made by solvent-spinning method

被引:36
作者
Feng, CY
Khulbe, KC
Chowdhury, G
Matsuura, T [1 ]
Sapkal, VC
机构
[1] Univ Ottawa, Dept Chem Engn, Ind Membrane Res Inst, Ottawa, ON K1N 6N5, Canada
[2] Amravati Univ, Dept Chem Engn, Amravati 444602, Maharashtra, India
关键词
atomic force microscopy; hollow tiber spinning condition; pore size and pore size distribution; ultrafiltration;
D O I
10.1016/S0376-7388(01)00410-0
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
The morphology of the inner and the outer surfaces of polyetherimide (PEI) hollow fibers were studied by atomic force microscopy (AFM). The effect of the spinning conditions, namely, the bore liquid flow rate on the surface characteristics was investigated. Bore liquid flow rate was varied between 0.1 and 0.4 ml/min. The pore sizes at the outer and inner surfaces of the hollow fibers were affected by the bore liquid flow rates. Bore liquid flow rates also influenced the ultrafiltration performances of the hollow fiber membranes. The alignment of nodule aggregates to the direction of bore liquid Row was observed. (C) 2001 Elsevier Science B.V. All rights reserved.
引用
收藏
页码:193 / 203
页数:11
相关论文
共 18 条
[1]   Investigations of surface properties of polymeric membranes by near field microscopy [J].
Bessieres, A ;
Meireles, M ;
Coratger, R ;
Beauvillain, J ;
Sanchez, V .
JOURNAL OF MEMBRANE SCIENCE, 1996, 109 (02) :271-284
[2]   DEVELOPMENT OF ASYMMETRIC HOLLOW FIBERS FROM POLYIMIDES FOR AIR SEPARATION [J].
CHUNG, TS ;
KAFCHINSKI, ER ;
FOLEY, P .
JOURNAL OF MEMBRANE SCIENCE, 1992, 75 (1-2) :181-195
[3]   Effect of shear rate within the spinneret on morphology, separation performance and mechanical properties of ultrafiltration polyethersulfone hollow fiber membranes [J].
Chung, TS ;
Qin, JJ ;
Gu, J .
CHEMICAL ENGINEERING SCIENCE, 2000, 55 (06) :1077-1091
[4]  
DENG S, IN PRESS SEP SCI TEC
[5]   INVESTIGATION OF DIALYSIS MEMBRANES WITH ATOMIC FORCE MICROSCOPY [J].
KASPER, K ;
HERRMANN, KH ;
DIETZ, P ;
HANSMA, PK ;
INACKER, O ;
LEHMANN, HD ;
RINTELEN, T .
ULTRAMICROSCOPY, 1992, 42 :1181-1188
[6]   Characterization of membranes prepared from PPO by Raman scattering and atomic force microscopy [J].
Khulbe, KC ;
Kruczek, B ;
Chowdhury, G ;
Gagne, S ;
Matsuura, T ;
Verma, SP .
JOURNAL OF MEMBRANE SCIENCE, 1996, 111 (01) :57-70
[7]   THE EFFECTS OF SPINNING CONDITIONS ON THE STRUCTURE FORMATION AND THE DIMENSION OF THE HOLLOW-FIBER MEMBRANES AND THEIR RELATIONSHIP WITH THE PERMEABILITY IN DRY-WET SPINNING TECHNOLOGY [J].
KIM, JH ;
PARK, YI ;
JEGAL, J ;
LEE, KH .
JOURNAL OF APPLIED POLYMER SCIENCE, 1995, 57 (13) :1637-1644
[8]   STRUCTURAL STUDY OF MICROPOROUS POLYPROPYLENE HOLLOW-FIBER MEMBRANES MADE BY THE MELT-SPINNING AND COLD-STRETCHING METHOD [J].
KIM, JJ ;
JANG, TS ;
KWON, YD ;
KIM, UY ;
KIM, SS .
JOURNAL OF MEMBRANE SCIENCE, 1994, 93 (03) :209-215
[9]   PREPARATION OF HOLLOW FIBER MEMBRANES FROM POLYETHERIMIDE FOR GAS SEPARATION [J].
KNEIFEL, K ;
PEINEMANN, KV .
JOURNAL OF MEMBRANE SCIENCE, 1992, 65 (03) :295-307
[10]   MORPHOLOGY AND PERFORMANCE OF POLYSULFONE HOLLOW-FIBER MEMBRANE [J].
LEE, SH ;
KIM, JJ ;
KIM, SS ;
KIM, UY .
JOURNAL OF APPLIED POLYMER SCIENCE, 1993, 49 (03) :539-548