Measurement of reduced sulphur compounds contained in aqueous matrices by direct injection into a gas chromatograph with a flame photometric detector

An analytical method was developed to measure the concentration of hydrogen sulphide, methyl mercaptan, dimethyl sulphide and dimethyl disulphide contained in aqueous matrices (distilled water, tap water, kraft mill condensates and membrane bioreactor mixed liquor) by direct injection of aqueous samples into a gas chromatograph with a flame photometric detector. The analytical method requires a small sample volume (2 ml), sample preparation and analysis can be completed within 20 min and no complex sampling apparatus is needed. Consistent results and good recoveries were observed in all matrices investigated over the range of concentrations examined. The relationship between the normalized peak area obtained from GC-flame photometric detection and the concentration of the reduced sulphur compounds (RSCs) examined did not follow the theoretical power law exponent of two. The power law exponent appeared to decrease with the organic fraction associated with each RSC. The observed power law exponents for hydrogen sulphide, methyl mercaptan, dimethyl sulphide and dimethyl disulphide were 1.92, 1.90, 1.66 and 1.72, respectively. (C) 1998 Elsevier Science B.V. All rights reserved.