A pyrosol process to deposit large-area SnO2:F thin films and its use as a transparent conducting substrate for CdTe solar cells

被引:55
作者
Veluchamy, P [1 ]
Tsuji, M [1 ]
Nishio, T [1 ]
Aramoto, T [1 ]
Higuchi, H [1 ]
Kumazawa, S [1 ]
Shibutani, S [1 ]
Nakajima, J [1 ]
Arita, T [1 ]
Ohyama, H [1 ]
Hanafusa, A [1 ]
Hibino, T [1 ]
Omura, K [1 ]
机构
[1] Matsushita Battery Ind Co Ltd, PV R&D Ctr, Moriguchi, Osaka 5708511, Japan
关键词
transparent conducting oxide films; SnO2; pyrosol technique; CdS/CdTe solar cell; dimethyl tin dichloride;
D O I
10.1016/S0927-0248(00)00279-8
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Highly transparent, low-resistance SnO2 :F films suitable as a substrate material for thin-film CdS/CdTe solar cells have been developed on 10 x 10, 30 x 60 and 82 x 71cm(2) glass substrates by an ultrasonic spray pyrolysis (pyrosol) process. Dimethyltin dichloride, NH,F and HF dissolved in water served as the source solution. A fine spray of the source solution has been transported using air as a carrier gas onto hot glass plates in a belt furnace maintained at 500-530 degreesC. A very high growth rate of > 15 nm/s and a high throughput of 3 min/glass plate (82 x 71cm(2) size) have been achieved with films showing greater uniformity, low sheet resistance and high optical transmission. Typical films exhibited a thickness of 500 nm, a sheet resistance of 8.1 Omega /sq., a mobility of 43.8 cm(2)/V s and a donor concentration of 3.5 x 10(20) cm(-3). A thin-film CdS/CdTe solar cell fabricated on a 30 x 60 cm(2) SnO2:F transparent conducting substrate exhibited a solar energy conversion efficiency maximum of 14.95% for 1 cm(2) cell and an average efficiency of 14.24% for 178 isolated 1 cm(2) cells. (C) 2001 Elsevier Science B.V. All rights reserved.
引用
收藏
页码:179 / 185
页数:7
相关论文
共 25 条
[11]   15.1% Highly efficient thin film CdS/CdTe solar cell [J].
Kumazawa, S ;
Shibutani, S ;
Nishio, T ;
Aramoto, T ;
Higuchi, H ;
Arita, T ;
Hanafusa, A ;
Omura, K ;
Murozono, M ;
Takakura, H .
SOLAR ENERGY MATERIALS AND SOLAR CELLS, 1997, 49 (1-4) :205-212
[12]   Effect of nitric-phosphoric acid etches on material properties and back-contact formation of CdTe-based solar cells [J].
Li, XN ;
Niles, DW ;
Hasoon, FS ;
Matson, RJ ;
Sheldon, P .
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 1999, 17 (03) :805-809
[13]   DEPOSITION OF IN2O3-SNO2 LAYERS ON GLASS SUBSTRATES USING A SPRAYING METHOD [J].
MANIFACIER, JC ;
FILLARD, JP ;
BIND, JM .
THIN SOLID FILMS, 1981, 77 (1-3) :67-80
[14]  
Murakami K, 1996, J AM CERAM SOC, V79, P2557, DOI 10.1111/j.1151-2916.1996.tb09015.x
[15]  
MUTO R, 1973, REP RES LAB ASAHI GL, V23, P27
[16]   Characterization of highly efficient CdTe thin film solar cells by low-temperature photoluminescence [J].
Okamoto, T ;
Matsuzaki, Y ;
Amin, N ;
Yamada, A ;
Konagai, M .
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 1998, 37 (07) :3894-3899
[17]   A pyrosol technique to deposit highly transparent, low-resistance SnO2:F thin films from dimethyltin dichloride [J].
Omura, K ;
Veluchamy, P ;
Tsuji, M ;
Nishio, T ;
Murozono, M .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1999, 146 (06) :2113-2116
[18]  
OMURA K, 1998, Patent No. 10206575
[19]   Electronic and optical properties of fluorine-doped tin oxide films [J].
Rakhshani, AE ;
Makdisi, Y ;
Ramazaniyan, HA .
JOURNAL OF APPLIED PHYSICS, 1998, 83 (02) :1049-1057
[20]   RELATION BETWEEN SOLUTION CHEMISTRY AND MORPHOLOGY OF SNO2-BASED THIN-FILMS DEPOSITED BY A PYROSOL PROCESS [J].
SMITH, A ;
LAURENT, JM ;
SMITH, DS ;
BONNET, JP ;
CLEMENTE, RR .
THIN SOLID FILMS, 1995, 266 (01) :20-30