Bulk and surface composition, amorphous structure, and thermocrystallization of electrodeposited alloys of tungsten with iron, nickel, and cobalt

被引:64
作者
Donten, M [1 ]
机构
[1] Univ Warsaw, Dept Chem, PL-02093 Warsaw, Poland
关键词
tungsten alloys; amorphous structure; electron spectroscopy for chemical analysis; bulk composition; electrodeposition;
D O I
10.1007/s100080050133
中图分类号
O646 [电化学、电解、磁化学];
学科分类号
081704 ;
摘要
It has been shown for iron-group alloys of tungsten, using ESCA spectroscopy of samples sputtered with argon ions and SEM/EDS analysis, that no oxygen is present in the alloy bulk. A very weak internal organization in the alloys, which follows from low and wide diffractograms usually obtained for electrodeposited layers, is thought to be a heavily distorted structure of the major metal component of the alloy. Thermal crystallization of thin layers of the amorphous tungsten alloys does not lead to formation of well-known intermetallic crystal structures.
引用
收藏
页码:87 / 96
页数:10
相关论文
共 22 条
[1]   PRESSURE-INDUCED AMORPHIZATION OF QUASI CRYSTALS [J].
AKAHAMA, Y ;
MORI, Y ;
KOBAYASHI, M ;
KAWAMURA, H ;
KIMURA, K ;
TAKEUCHI, S .
JOURNAL OF THE PHYSICAL SOCIETY OF JAPAN, 1989, 58 (07) :2231-2234
[2]   THE ELECTROCHEMICAL PROPERTIES OF METALLIC GLASSES [J].
ARCHER, MD ;
CORKE, CC ;
HARJI, BH .
ELECTROCHIMICA ACTA, 1987, 32 (01) :13-26
[3]  
BARD A, 1972, ENCY ELECTROCHEMISTR, V2
[4]   ENTHALPIES OF FORMATION OF LIQUID AND SOLID BINARY-ALLOYS BASED ON 3D METALS .3. ALLOYS OF IRON [J].
BOOM, R ;
DEBOER, FR ;
NIESSEN, AK ;
MIEDEMA, AR .
PHYSICA B & C, 1983, 115 (03) :285-309
[5]  
BRUNCH A, 1989, J APPL PHYS, V50, P7603
[6]  
CROOPNICK GA, 1985, Patent No. 4529668
[7]  
DONTEN M, 1994, POL J CHEM, V68, P1193
[8]  
DONTEN M, 1990, J ELECTROCHEM SOC, V140, P3417
[9]  
DONTEN M, 1990, J APPL ELECTROCHEM, V20, P671
[10]   PREPARATION OF AMORPHOUS FE-ZR ALLOYS BY MECHANICAL ALLOYING AND MELT SPINNING METHODS .1. A STRUCTURAL COMPARISON [J].
ENNAS, G ;
MAGINI, M ;
PADELLA, F ;
SUSINI, P ;
BOFFITTO, G ;
LICHERI, G .
JOURNAL OF MATERIALS SCIENCE, 1989, 24 (09) :3053-3058