EMI shielding effectiveness of metal-coated carbon fiber-reinforced ABS composites

被引:200
作者
Tzeng, SS [1 ]
Chang, FY [1 ]
机构
[1] Tatung Univ, Dept Mat Engn, Taipei 104, Taiwan
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2001年 / 302卷 / 02期
关键词
EMI shielding; electroless deposition; cementation;
D O I
10.1016/S0921-5093(00)01824-4
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
EMI shielding effectiveness of copper- and nickel-coated carbon fiber-reinforced ABS composites was investigated. The coaxial transmission line method was used to measure the EMI shielding effectiveness of the metal-coated carbon fibers/ABS composites. The carbon fibers were coated with copper or nickel using the cementation and electroless deposition techniques. Measurements of fiber length distribution in the composites indicated that the length of copper-coated carbon fibers was shorter than that of nickel-coated carbon fibers after composite fabrication. As a result. their composites also showed poor EMI shielding effectiveness. Among the metal-coated carbon fibers/ABS composites studied in this investigation, electroless nickel-coated carbon fibers/ABS composites showed the best EMI shielding capability due to longer fiber length distribution and excellent bonding between nickel coating and the fibers. The metal coatings, deposited using the cementation technique, tended to detach from the fibers during the compounding process, and consequently, poor EMI shielding effectiveness was obtained for their composites. (C) 2001 Elsevier Science B.V. All rights reserved.
引用
收藏
页码:258 / 267
页数:10
相关论文
共 29 条
[1]   STUDIES ON NICKEL COATED CARBON-FIBERS AND THEIR COMPOSITES [J].
ABRAHAM, S ;
PAI, BC ;
SATYANARAYANA, KG ;
VAIDYAN, VK .
JOURNAL OF MATERIALS SCIENCE, 1990, 25 (06) :2839-2845
[2]   COPPER COATING ON CARBON-FIBERS AND THEIR COMPOSITES WITH ALUMINUM MATRIX [J].
ABRAHAM, S ;
PAI, BC ;
SATYANARAYANA, KG ;
VAIDYAN, VK .
JOURNAL OF MATERIALS SCIENCE, 1992, 27 (13) :3479-3486
[3]   THE ELECTRICAL-CONDUCTIVITY OF POLYPROPYLENE AND NICKEL-COATED CARBON-FIBER COMPOSITE [J].
AHMAD, MS ;
ZIHILIF, AM ;
MARTUSCELLI, E ;
RAGOSTA, G ;
SCAFORA, E .
POLYMER COMPOSITES, 1992, 13 (01) :53-57
[4]   SCANNING AUGER MEASUREMENTS OF NICKEL COATED CARBON-FIBERS [J].
BRINEN, JS .
SURFACE AND INTERFACE ANALYSIS, 1987, 10 (01) :29-35
[5]  
CHEN KJ, 1984, THESIS RENSSELAER PO
[6]   EFFECT OF TITANATE COUPLING AGENT ON ELECTROMAGNETIC-INTERFERENCE SHIELDING EFFECTIVENESS AND MECHANICAL-PROPERTIES OF PC-ABS-NCF COMPOSITE [J].
CHIANG, WY ;
CHIANG, YS .
JOURNAL OF APPLIED POLYMER SCIENCE, 1992, 46 (04) :673-681
[7]  
CHIOU TW, 1994, THESIS TATUNG U
[8]   ELECTRON-MICROSCOPE STUDY OF NUCLEATION AND GROWTH OF ELECTROLESS COBALT AND NICKEL [J].
CHOW, SL ;
SCHLESINGER, M ;
HEDGECOCK, NE ;
REZEK, J .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1972, 119 (12) :1614-+
[9]   TECHNIQUE FOR CONDUCTIVITY MEASUREMENTS ON SINGLE-CRYSTALS OF ORGANIC MATERIALS [J].
COLEMAN, LB .
REVIEW OF SCIENTIFIC INSTRUMENTS, 1975, 46 (08) :1125-1126
[10]   Optimum conditions of electroless nickel plating on carbon fibers for EMI shielding effectiveness of ENCF/ABS composites [J].
Huang, CY ;
Pai, JF .
EUROPEAN POLYMER JOURNAL, 1998, 34 (02) :261-267