Aeroacoustical coupling in a ducted shallow cavity and fluid/structure effects on a steam line

A pure tone phenomenon has been observed at 460 Hz in a piping steam line. The acoustical energy has been identified to be generated in an open gate valve and to be of cavity noise type. This energy is then transmitted to the main pipe by fluid/structure coupling. The objectives here are to display the mechanism of the flow acoustic coupling in the cavity and in the duct through an aeroacoustical analysis and to understand the way of energy transfer from the fluid to the main pipe through a vibroacoustical analysis. Concerning the first objective, an experimental study by means of 2/7 scale models in air is analysed by means of numerical flow simulation. The flow acoustic phenomena are modelled by computing the Euler equations. Two different computations are carried out: in the first one, a pure Euler modelling is used, in the second one, a boundary layer obtained from experimental data is introduced in the computation in order to have a realistic flow profile upstream the cavity. The boundary layer flow profile appears to be essential to recover the experimentally observed coupling between the shear-layer instability and the acoustical transverse mode of the pipe. The numerical results confirm that the second aerodynamic mode is responsible for the oscillation. While the predicted frequency agrees about 1% with the scale model experiments, the predicted amplitude is approximately 15 dB too low. For the second objective, fluid/structure coupling in the main pipe is studied using two fully coupled methods. The first method consists in a modal analysis of the line using a fluid-structure finite element model. The second one is based on the analysis of dispersion diagrams derived from the local equations of cylindrical shells filled with fluid. The way of energy transfer in transverse acoustical waves coupled with flexion-ovalization deformations of the pipe is highlighted using both methods. The dispersion diagrams allow a fast and accurate analysis. The modal analysis using a finite-element model may complete the first one with quantitative data. The link between the fluid/acoustic and the fluid/structure analysis is then the excitation of the transverse acoustical mode of the duct. (C) 2003 Elsevier Ltd. All rights reserved.