Sliding wear of Al2O3P/6061 Al composite

The mild sliding wear behaviour of a 15 vol % Al2O3p/6061 Al composite has been investigated by using a pin-on-disc reciprocating sliding machine. The composite has been shown to exhibit an excellent wear resistance as compared to the unreinforced matrix alloy. The wear rate of the composite under dry wear conditions with a 12N load is approximately one tenth of that in the 6061 aluminium alloy. The wear rate of the composite under lubrication with 15W/40 gear oil under a 100N load is only one thousandth of that in the 6061 aluminium alloy. The dry wear resistance of an over-aged sample is shown here to be better than a peak aged or under-aged sample when the composite was aged at 160 degrees C. The coefficient of friction of the composite was approximately 0.5-0.6 under dry conditions and 0.07 in lubricated wear experiments. In the initial stage, the worn surface of the composite under dry conditions is primarily composed of ploughed grooves and ductile tear. The composite makes a conducting contact with the steel pin. The worn surface is composed of compacted powder and the contact potential gradually increases when the period of the wear experiment goes beyond 2 h.