Recent progress in metallic glasses in Taiwan

被引：90

作者：

Huang, J. C. ^{[1
]}

Chu, J. P. ^{[2
]}

Jang, J. S. C. ^{[3
]}

机构：

[1] Natl Sun Yat Sen Univ, Ctr Nanosci & Nanotechnol, Dept Mat & Optoelect Sci, Kaohsiung 80424, Taiwan

[2] Natl Taiwan Univ Sci & Technol, Dept Polymer Engn, Taipei 10607, Taiwan

[3] I Shou Univ, Dept Mat Sci & Engn, Kaohsiung 840001, Taiwan

来源：

INTERMETALLICS | 2009年 / 17卷 / 12期

关键词：

Glasses; metallic; Mechanical properties at ambient temperature; Rapid solidification processing; Thermodynamic and thermochemical properties; BULK AMORPHOUS ALLOY; ZR-X ALLOYS; VISCOUS-FLOW BEHAVIOR; RARE-EARTH-ELEMENTS; OXIDATION BEHAVIOR; THERMAL-STABILITY; COMPOSITE ALLOY; MECHANICAL-PROPERTIES; HYBRID COMPOSITES; AIR-OXIDATION;

D O I：

10.1016/j.intermet.2009.05.004

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

The recent research and development on metallic glasses in Taiwan over the past decade is reviewed in this paper. The major focus was to develop tougher bulk metallic glasses (BMGs), bulk metallic glass composites (BMGCs), and thin film metallic glasses (TFMGs), mostly in Zr and Mg based systems. Due to the Taiwan industry characteristics, metallic glasses are favored in the application for micro-electromechanical systems (MEMS), including micro- or nano-imprinting for optoelectronic devices and hologram patterns. (C) 2009 Elsevier Ltd. All rights reserved.

引用

页码：973 / 987

页数：15

共 100 条

[1] On Mg-Al-Zn intermetallic alloys made by friction stir processing containing quasi-crystals or amorphous phases [J].

Chang, C. I. ;

Lee, C. J. ;

Chuang, C. H. ;

Pei, H. R. ;

Huang, J. C. .

THERMEC 2006 SUPPLEMENT: 5TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS, 2007, 15-17 :387-392

[2] Mg-Cu-Gd layered composite plate synthesized via the spray forming process [J].

Chang, K. F. ;

Guo, M. -L. T. ;

Kong, R. H. ;

Tsao, Chi Y. A. ;

Huang, J. C. ;

Jang, J. S. C. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 477 (1-2) :58-62

[3] Hot workability of the Mg65Cu20Y10Ag5 amorphous/nanoZrO2 composite alloy within supercooled temperature region [J].

Chang, L. J. ;

Fang, G. R. ;

Jang, J. S. C. ;

Lee, I. S. ;

Huang, J. C. ;

Tsao, Chi Y. A. .

COMPOSITE MATERIALS V, 2007, 351 :103-+

[4] Glass forming and thermal properties of the Mg65Cu25Gd10-xNdx (x=0∼10) amorphous alloys [J].

Chang, L. J. ;

Yang, B. C. ;

Chiang, P. T. ;

Jang, J. S. C. ;

Huang, J. C. .

THERMEC 2006, PTS 1-5, 2007, 539-543 :2106-+

[5] Mechanical properties of the Mg-based amorphous/nano zirconia composite alloy [J].

Chang, L. J. ;

Young, J. H. ;

Jiang, B. C. ;

Jang, J. S. C. ;

Huang, J. C. ;

Tsao, Chi Y. A. .

THERMEC 2006, PTS 1-5, 2007, 539-543 :925-+

[6] Mechanical properties of the hot-pressed amorphous Mg65Cu20Y10Ag5/NanoZrO2 composite alloy [J].

Chang, L. J. ;

Fang, G. R. ;

Jang, J. S. C. ;

Lee, I. S. ;

Huang, J. C. ;

Tsao, Chi Y. A. ;

Jou, J. L. .

MATERIALS TRANSACTIONS, 2007, 48 (07) :1797-1801

[7] Crystallization and thermal stability of the Mg65Cu25-xGd10Agx (x=0-10) amorphous alloys [J].

Chang, L. J. ;

Jang, J. S. C. ;

Yang, B. C. ;

Huang, J. C. .

JOURNAL OF ALLOYS AND COMPOUNDS, 2007, 434 (SPEC. ISS.) :221-224

[8] Synthesis of the magnesium-based nano/amorphous-composite alloy powder by the combination method of melt-spinning and mechanical alloying [J].

Chang, L. J. ;

Young, J. H. ;

Jang, J. S. C. ;

Huang, J. C. ;

Tsao, Chi. Y. A. .

COMPOSITE MATERIALS IV, 2006, 313 :97-103

[9] Viscous flow behavior and thermal properties of bulk amorphous Mg58Cu31Y11 alloy [J].

Chang, Y. C. ;

Hung, T. H. ;

Chen, H. M. ;

Huang, J. C. ;

Nieh, T. G. ;

Lee, C. J. .

INTERMETALLICS, 2007, 15 (10) :1303-1308

[10] On the fragility and thermomechanical properties of Mg-Cu-Gd-(B) bulk metallic glasses [J].

Chang, Y. C. ;

Huang, J. C. ;

Cheng, Y. T. ;

Lee, C. J. ;

Du, X. H. ;

Nieh, T. G. .

JOURNAL OF APPLIED PHYSICS, 2008, 103 (10)

← 1 2 3 4 5 6 7 8 9 10 →