Optimal design of stator interior permanent magnet machine with minimized cogging torque for wind power application

被引:41
作者
Zhang, Jianzhong [1 ,2 ]
Cheng, Ming [1 ]
Chen, Zhe [2 ]
机构
[1] SE Univ, Sch Elect Engn, Engn Res Ctr Motion Control MOE, Nanjing 210096, Peoples R China
[2] Univ Aalborg, Inst Energy Technol, DK-9220 Aalborg, Denmark
关键词
cogging torque; flux switching; optimal design; permanent magnet machine; wind power;
D O I
10.1016/j.enconman.2008.02.017
中图分类号
O414.1 [热力学];
学科分类号
摘要
This paper proposes a new approach to minimize the cogging torque of a stator interior permanent magnet (SIPM) machine. The optimization of stator slot gap and permanent magnet is carried out and the cogging torque ripple is analyzed by using finite element analysis. Experiments on a prototype machine verify the theoretical analysis. A comparison between the improved SIPM generator and a radial flux permanent magnet synchronous generator for a 3-MW wind turbine is carried out. It shows that the proposed SIPM generator has the advantages of higher power density and lower cost. (c) 2008 Elsevier Ltd. All rights reserved.
引用
收藏
页码:2100 / 2105
页数:6
相关论文
共 11 条
[1]   Design and comparison of different flux-switch synchronous machines for an aircraft oil breather application [J].
Amara, Y ;
Hoang, E ;
Gabsi, M ;
Lécrivain, M ;
Allano, S .
EUROPEAN TRANSACTIONS ON ELECTRICAL POWER, 2005, 15 (06) :497-511
[2]   Performance analysis of 8/6-pole doubly salient permanent magnet motor [J].
Chau, KT ;
Cheng, M ;
Chan, CC .
ELECTRIC MACHINES AND POWER SYSTEMS, 1999, 27 (10) :1055-1067
[3]   Design and analysis of a new doubly salient permanent magnet motor [J].
Cheng, M ;
Chau, KT ;
Chan, CC .
IEEE TRANSACTIONS ON MAGNETICS, 2001, 37 (04) :3012-3020
[4]  
Grauers A., 1996, Ph.D. Thesis
[5]  
Hansen L H., 2001, CONCEPTUAL SURVEY GE
[6]  
HONG E, 1997, P 7 EUR C POW EL APP, P903
[7]  
Hua W, 2006, IEEE IND APPLIC SOC, P2403
[8]   A NOVEL PERMANENT-MAGNET MOTOR WITH DOUBLY SALIENT STRUCTURE [J].
LIAO, YF ;
LIANG, F ;
LIPO, TA .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 1995, 31 (05) :1069-1078
[9]   Comparison of direct-drive and geared generator concepts for wind turbines [J].
Polinder, Henk ;
van der Pijl, Frank F. A. ;
de Vilder, Gert-Jan ;
Tavner, Peter J. .
IEEE TRANSACTIONS ON ENERGY CONVERSION, 2006, 21 (03) :725-733
[10]  
Rauch S.E., 1955, Trans Am Inst Electr Eng Part 3, P1261