New developments in powder technology

被引：13

作者：

Torralba, J. M. ^{[1
]}

Gordo, E. ^{[1
]}

Jimenez-Morales, A. ^{[1
]}

Ruiz-Navas, E. M. ^{[1
]}

Campos, M. ^{[1
]}

Rabanal, M. E. ^{[1
]}

Ruiz-Amador, D. ^{[1
]}

机构：

[1] Univ Carlos III Madrid, Dpto Ciencia & Ing Mat, E-28903 Getafe, Spain

来源：

MATERIALS AND TECHNOLOGIES | 2007年 / 23卷

关键词：

low alloyed steels; iron base composites; aluminium; spray pyrolysis; phosphor material; mechanical alloying; MIM;

D O I：

10.4028/www.scientific.net/AMR.23.1

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this paper we try to summarize the research activities of the PM group in the University Carlos III of Madrid. This research group is highly devoted to PM activities covering different fields (both under the point of view of the materials and the processes). In the PM lab powders can be produced by spray pyrolysis, mechanical alloying and water/gas atomization. These powders can be processed by pressing and sintering, powder injection moulding, isostatic pressing,... Sintering facilities cover vacuum and gas controlled sintering. Regarding the materials, in the group we have different research lines covering low alloyed steels, stainless steels, HSS, ferrites, metal matrix composite (Al and Fe base), Ti, intermetallics, ceramics with functional and structural propierties, ... In this paper we describe slightly some of the recent developments produced in the group which is not exhaustive (are there a few more) but representative about we are doing at present.

引用

页码：1 / 8

页数：8

共 23 条

[1]

CONTRERAS JM, IN PRESS MAT SI FORU

[2] Comparison of Mn, Cr and Mo alloyed sintered steels prepared from elemental powders [J].

Danninger, H ;

Pöttschacher, R ;

Bradac, S ;

Salak, A ;

Seyrkammer, J .

POWDER METALLURGY, 2005, 48 (01) :23-32

[3] Enhancement of liquid phase sintering through Al-Si additions to Al-Cu systems [J].

Delgado, ML ;

Ruiz-Navas, EM ;

Gordo, E ;

Torralba, JM .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 162 :280-285

[4] T1(C,N) CERMETS - METALLURGY AND PROPERTIES [J].

ETTMAYER, P ;

KOLASKA, H ;

LENGAUER, W ;

DREYER, K .

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 1995, 13 (06) :343-351

[5] 6061 Al reinforced with zirconium diboride particles processed by conventional powder metallurgy and mechanical alloying [J].

Fogagnolo, JB ;

Robert, MH ;

Ruiz-Navas, EM ;

Torralba, JM .

JOURNAL OF MATERIALS SCIENCE, 2004, 39 (01) :127-132

[6] 6061 Al reinforced with silicon nitride particles processed by mechanical milling [J].

Fogagnolo, JB ;

Ruiz-Navas, EM ;

Robert, MH ;

Torralba, JM .

SCRIPTA MATERIALIA, 2002, 47 (04) :243-248

[7]

GOMEZ B, 2006, IN PRESS MAT SCI ENG

[8] Wear mechanisms in high speed steel reinforced with (NbC)p and (TaC)p MMCs [J].

Gordo, E ;

Velasco, F ;

Antón, N ;

Torralba, JM .

WEAR, 2000, 239 (02) :251-259

[9]

GORDO E, 2001, NEW DEV POWDER TECHN, V3, P1355

[10]

KULKARNI KM, 1990, ADV POWDER METALLURG, V3

← 1 2 3 →