Methane conversion to syngas over Pt-based electrode in a solid oxide fuel cell reactor

被引：38

作者：

Semin, GL

Belyaev, VD

Demin, AK

Sobyanin, VA ^{[1
]}

机构：

[1] Boreskov Inst Catalysis, Novosibirsk 630090, Russia

[2] Inst High Temp Electrochem, Sverdlovsk 620219, Russia

[3] Novosibirsk State Univ, Novosibirsk 630090, Russia

来源：

APPLIED CATALYSIS A-GENERAL | 1999年 / 181卷 / 01期

关键词：

partial oxidation; methane; synthesis gas; platinum electrode; solid oxide fuel cell; cogeneration;

D O I：

10.1016/S0926-860X(98)00388-3

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

Electrocatalytic oxidation of methane over Pt-based electrode-catalyst in a solid oxide fuel cell reactor CH4 Pt0.9ZrO(2) + 0.1Y(2)O(3)\Pt, air was studied at 800 degrees C and atmospheric pressure, SEM and ESCA techniques were used to characterize the electrode-catalyst, It is found that the Pt-based electrode is an active electrode-catalyst for partial oxidation of methane (in a diluent absence) to syngas, concentration ratio being [H-2]/[CO]approximate to 2. Methane conversion and carbon monoxide selectivity attained 97% and 95%, respectively, Under these conditions, reactor is operated in a fuel cell mode and the electrode-catalyst is stable (to coking, too), (C) 1999 Elsevier Science B.V. All rights reserved.

引用

页码：131 / 137

页数：7

共 24 条

[1] Oxidation mechanism and effective anode thickness of SOFC for dry methane fuel [J].