The dynamic thermal characteristics of lightweight building elements with a forced ventilated cavity and radiation barriers

被引:17
作者
Cerne, B
Medved, S
机构
[1] Trimo DD, Trebnje 8210, Slovenia
[2] Univ Ljubljana, Fac Mech Engn, Ljubljana 1000, Slovenia
关键词
lightweight building element; ventilated cavity; dynamic thermal characteristics; two-dimensional heat transfer;
D O I
10.1016/j.enbuild.2004.12.006
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
This paper presents an analysis of the dynamic thermal characteristics of lightweight building elements (LBEs) with a forced ventilated cavity and radiation barriers. A two-dimensional numerical model was used for the analysis, which was verified with an analytical method and outdoor experiments. The influence of the temperature boundary conditions at the cavity inlet and along the ambient surface of the cavity on the dynamic thermal characteristics of the LBEs was analyzed separately. The influence of the LBE width, the cavity width, the specific air flow rate and the cavity surface emissivities was also demonstrated. Multi-parametric equations were derived for predicting the heat flux amplitude and the decrement factor along the length of the LBE. (C) 2005 Elsevier B.V. All rights reserved.
引用
收藏
页码:972 / 981
页数:10
相关论文
共 15 条
[1]  
[Anonymous], 1996, 6946 EN ISO
[2]  
*AS, 1989, 3634 AS
[3]   Investigation of the thermal performance of a passive solar test-room with wall latent heat storage [J].
Athienitis, AK ;
Liu, C ;
Hawes, D ;
Banu, D ;
Feldman, D .
BUILDING AND ENVIRONMENT, 1997, 32 (05) :405-410
[4]  
Carslaw H. S., 1959, CONDUCTION HEAT SOLI
[5]  
*CHAM, 2003, PHOENICS 3 5 1 PAR H
[6]  
*EN ISO, 1999, 13786 EN ISO
[7]  
*EN ISO, 1995, 5167 1 EN ISO 1
[8]  
KAIRYS L, 2003, P C DYN AN MOD TECHN, P105
[9]   On the performance of radiant barriers in combination with different attic insulation levels [J].
Medina, MA .
ENERGY AND BUILDINGS, 2000, 33 (01) :31-40
[10]   EFFECT OF ATTIC VENTILATION ON THE PERFORMANCE OF RADIANT BARRIERS [J].
MEDINA, MA ;
ONEAL, DL ;
TURNER, WD .
JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME, 1992, 114 (04) :234-239