Synthesis and characterization of Mg-AZ91/AlN composites

被引:63
作者
Bedolla, E. [2 ]
Lemus-Ruiz, J. [2 ]
Contreras, A. [1 ]
机构
[1] Inst Mexicano Petr, Programa Integridad Ductos, Col San Bartolo Atepehua 07730, DF, Mexico
[2] Univ Michoacana de San Nicolas Hidalgo, Inst Invest Met, Morelia 58000, Mich, Mexico
关键词
Composites; Particulates; Microstructure; REINFORCED CAST METALS; MECHANICAL-PROPERTIES; MATRIX COMPOSITES; AL-ALLOYS; ALUMINUM; MG; INFILTRATION; PARTICULATE; KINETICS;
D O I
10.1016/j.matdes.2012.02.001
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This work presents the synthesis and characterization of metal matrix composites (MMCs) of magnesium alloy AZ91E reinforced with AlN (49 vol.%). Molten AZ91E magnesium alloy was pressureless infiltrated at 900 degrees C into AlN preforms sintered at 1450 degrees C with porosities around 51 vol.%. The composites obtained were microstructurally characterized through scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD). Reinforcement distribution, microstructure, reaction products and some mechanical and thermoelectric properties were evaluated. SEM observations showed a homogeneous microstructure of matrix and reinforcement. AlN, Mg and Mg17Al12 phases were detected through XRD. TEM observations revealed the presence of Mg17Al12, AlN, and MgO precipitates. Results of mechanical characterization indicate average values of elastic modulus of 133 GPa and hardness of 24 HRC (260 HV). The coefficient of thermal expansion (CTE) was 9.53 x 10 (6)degrees C (1) in the temperature range of 27-227 degrees C (300-500 K). The electrical resistivity was around 45.9 x 10(6) Omega cm at temperature of 25 degrees C. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码:91 / 98
页数:8
相关论文
共 29 条
[1]  
[Anonymous], 2000, C2000 ASTM
[2]   Reinforced cast metals - Part II Evolution of the interface [J].
Asthana, R .
JOURNAL OF MATERIALS SCIENCE, 1998, 33 (08) :1959-1980
[3]   Reinforced cast metals - Part I Solidification microstructure [J].
Asthana, R .
JOURNAL OF MATERIALS SCIENCE, 1998, 33 (07) :1679-1698
[4]  
Chedru M, 1999, J MICROSC-OXFORD, V196, P103, DOI 10.1046/j.1365-2818.1999.00615.x
[5]   Wetting of TiC by Al-Cu alloys and interfacial characterization [J].
Contreras, A. .
JOURNAL OF COLLOID AND INTERFACE SCIENCE, 2007, 311 (01) :159-170
[6]   Mg/TiC composites manufactured by pressureless melt infiltration [J].
Contreras, A ;
López, VH ;
Bedolla, E .
SCRIPTA MATERIALIA, 2004, 51 (03) :249-253
[7]   Interfacial phenomena in wettability of TiC by Al-Mg alloys [J].
Contreras, A ;
Bedolla, E ;
Pérez, R .
ACTA MATERIALIA, 2004, 52 (04) :985-994
[8]   Wettability and spreading kinetics of Al and Mg on TiC [J].
Contreras, A ;
León, CA ;
Drew, RAL ;
Bedolla, E .
SCRIPTA MATERIALIA, 2003, 48 (12) :1625-1630
[9]   Elaboration and characterization of a metal matrix composite: Al/AlN [J].
Couturier, R ;
Ducret, D ;
Merle, P ;
Disson, JP ;
Joubert, P .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 1997, 17 (15-16) :1861-1866
[10]  
Ding-Fwu L, 2002, J EUR CERAM SOC, P22253