Fluctuation characteristics of two-phase flow splitting at a vertical impacting T-junction

被引:43
作者
Wang, SF [1 ]
Shoji, M [1 ]
机构
[1] Univ Tokyo, Grad Sch Engn, Dept Engn Mech, Bunkyo Ku, Tokyo 1138656, Japan
关键词
fluctuation; two-phase flow; T-junction; churn flow; extraction ratio;
D O I
10.1016/S0301-9322(02)00104-0
中图分类号
O3 [力学];
学科分类号
08 [工学]; 0801 [力学];
摘要
In order to investigate the fluctuation characteristics of two-phase flow splitting at a T-junction, particular attention was paid on Churn flow which had the strongest fluctuation comparing with bubble flow and annular flow. The main tube of the T-junction was vertical and the two branches were horizontal. All three pipes connecting to the junction were of 15 mm inner diameter. A statistical analysis based on Root Mean Square (RMS) was applied to temporal differential pressure signals and gas flow rate signals. The Power Spectral Density (PSD) was also employed to reveal their peculiar features in frequency domain as well. The effects of the extraction flow ratio and the gas and liquid superficial velocity upstream on fluctuation characteristics of gas-liquid two-phase flow splitting at the T-junction were investigated in detail. It is found that there is a wide fluctuation in both differential pressure and gas flow rate downstream at every extraction ratio (W-3/W-1) and the fluctuation intensity increases as W-3/W-1 increasing. It is also made clear that increasing either water superficial velocity or gas superficial velocity in inlet causes fluctuation to become more intensive. (C) 2002 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:2007 / 2016
页数:10
相关论文
共 12 条
[1]
ASANO H, 2001, JPN SOC MECH ENG, V67, P46
[2]
AZZOPARDI BJ, 1988, INT J ENG FLUID MECH, V1, P320
[3]
ANNULAR 2-PHASE FLOW SPLIT AT AN IMPACTING-T [J].
AZZOPARDI, BJ ;
PURVIS, A ;
GOVAN, AH .
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 1987, 13 (05) :605-614
[4]
Application of chaos theory in identification of two-phase flow patterns and transitions in a small, horizontal, rectangular channel [J].
Cai, Y ;
Wambsganss, MW ;
Jendrzejczyk, JA .
JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 1996, 118 (02) :383-390
[5]
Chien S. F., 1992, SPE PROD ENG, V7, P368, DOI DOI 10.2118/22764-PA
[6]
FUJII T, 1995, P 2 INT C MULT FLOW
[7]
2-PHASE FLOW SPLITTING AT A PIPE TEE [J].
HONG, KC .
JOURNAL OF PETROLEUM TECHNOLOGY, 1978, 30 (FEB) :290-296
[8]
2-PHASE FLOW SPLITTING AT AN IMPACTING TEE [J].
HONG, KC ;
GRISTON, S .
SPE PRODUCTION & FACILITIES, 1995, 10 (03) :184-190
[9]
Best practice for the distribution and metering of two-phase steam [J].
Hong, KC ;
Griston, S .
SPE PRODUCTION & FACILITIES, 1997, 12 (03) :173-180
[10]
PHASE-SEPARATION IN IMPACTING WYES AND TEES [J].
HWANG, ST ;
SOLIMAN, HM ;
LAHEY, RT .
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 1989, 15 (06) :965-975