Carbon molecular sieving membranes derived from lignin-based materials

Carbon molecular sieving membranes were prepared by pyrolysis of lignocresol derived from lignin by the phase-separation method. Lignocresol membranes formed by a dip process on a porous alpha-alumina tubing were carbonized at 400-800degreesC under nitrogen atmosphere. The thickness of the membrane formed on the outer surface of the substrate was about 400 nm judging from SEM observation. Gas-evolving behavior of lignocresol was measured using thermogravimetry-mass spectrometry (TG-MS). The gaseous products evolved from lignocresol included a number of fragments with higher molecular weights; whereas those from phenolic resin are mainly due to phenol and methylphenol. These evolved pyrolysis fragments effectively contribute to micropore formation of carbonized lignocresol membranes. Gas permeation rates through the membrane decreased in the order of increasing kinetic molecular diameter of the penetrant gas, and the membrane behaved like a "molecular sieve." The permeation properties were dependent on heating conditions, and a pyrolysis temperature of 600degreesC gave the best membrane performance. Gas selectivities of the membrane prepared at 600degreesC were 50, 8, 290, and 87 for CO2/N-2, O-2/N-2, H-2/CH4, and CO2/CH4 at 35degreesC, respectively.