Increasing the accuracy of trip rate information from passive multi-day GPS travel datasets: Automatic trip end identification issues

With the availability of Global Positioning System (GPS) receivers to capture vehicle location, it is now feasible to easily collect multiple days of travel data automatically. However, GPS-collected data are not ready for direct use in trip rate or route choice research until trip ends are identified within large GPS data streams. One common parameter used to divide trips is dwell time, the time a vehicle is stationary. Identifying trips is particularly challenging when there is trip chaining with brief stops, such as picking up and dropping off passengers. It is hard to distinguish these stops from those caused by traffic controls or congestion. Although the dwell time method is effective in many cases, it is not foolproof and recent research indicates use of additional logic improves trip dividing. While some studies incorporating more than dwell time to identify trip ends having been conducted, research including actual trip ends to evaluate the success of trip dividing methods used have been limited. In this research, 12 ten-day real-world GPS travel datasets were used to develop, calibrate and compare three methods to identify trip start points in the data stream. The true start and end points of each trip were identified in advance in the GPS data stream using a supplemental trip log completed by the participants so that the accuracy of each automated trip division method could be measured and compared. A heuristic model, which combines heading change, dwell time and distance between the GPS points and the road network, performs best, correctly identifying 94% of trip ends. (c) 2006 Published by Elsevier Ltd.