Loop-seal operation of iron ore particles in pneumatic conveying

被引:13
作者
Namkung, W [1 ]
Cho, M [1 ]
机构
[1] Res Inst Ind Sci & Technol, RIST, Smelting Reduct Res Team, Pohang 790330, Kyungbuk, South Korea
关键词
loop-seal; iron ore particles; solid circulation rate;
D O I
10.1007/BF02707234
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
Loop-seal operation characteristics have been determined in pneumatic conveying (0.078 m ID x 6.0 m high) with iron ore particles (680 gm and 4,500 kg/m(3)). Solids circulation rates through the loop-seal increase linearly with increasing vertical aeration rate at constant bottom aeration. When the aeration air is injected at the weir section and the lowest point of vertical section, stable higher solids circulation rates are obtained. The solids circulation rates are predicted by using pressure drop measured in fully developed region of riser. The calculated solids circulation rates are in good agreement with the measured values.
引用
收藏
页码:1066 / 1071
页数:6
相关论文
共 33 条
[1]   L-valve behaviour with solids of different size and density [J].
Arena, U ;
Langeli, CB ;
Cammarota, A .
POWDER TECHNOLOGY, 1998, 98 (03) :231-240
[2]  
BASU P, 1999, EXPT INVESTIGATION L, P805
[3]   SOLIDS CIRCULATION IN A SPOUT FLUID BED WITH DRAFT TUBE [J].
BERRUTI, F ;
MUIR, JR ;
BEHIE, LA .
CANADIAN JOURNAL OF CHEMICAL ENGINEERING, 1988, 66 (06) :919-923
[4]  
Bi H.T., 1991, AICHE ANN M
[5]   Effect of pressure on loop seal operation for a pressurized circulating fluidized bed [J].
Cheng, LM ;
Basu, P .
POWDER TECHNOLOGY, 1999, 103 (03) :203-211
[6]  
Geldart, 1986, GAS FLUIDIZATION TEC, P341
[7]   THE BEHAVIOR OF L-VALVES WITH GRANULAR POWDERS [J].
GELDART, D ;
JONES, P .
POWDER TECHNOLOGY, 1991, 67 (02) :163-174
[8]  
KARRI SBR, 1992, FLUIDIZATION, V7, P345
[9]  
KARRI SBR, 1995, FLUIDIZATION, V8, P557
[10]  
KIM SM, 1997, THESIS KAIST TAEJON