Modular Dual-Active Bridge Converter Architecture

被引:113
作者
Zumel, Pablo [1 ]
Ortega, Leonardo [2 ]
Lazaro, Antonio [1 ]
Fernandez, Cristina [1 ]
Barrado, Andres [1 ]
Rodriguez, Alberto [3 ]
Hernando, Marta Maria [3 ]
机构
[1] Univ Carlos III Madrid, Power Elect Syst Grp GSEP, Getafe 28911, Spain
[2] Escuela Politec Nacl, Quito 170517, Ecuador
[3] Univ Oviedo, Elect Power Supply Syst Grp SEA, Gijon 33204, Spain
关键词
DC-DC power conversion; digital control; dual-active bridge (DAB) converter; modular power converters; power conversion; DC-DC CONVERTER; INPUT-SERIES; PERFORMANCE; DESIGN;
D O I
10.1109/TIA.2016.2527723
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This paper describes a modular architecture based on the dual-active bridge (DAB) converter in input-series-output-parallel (ISOP) connection. This work is focused on the input voltage sharing to ensure a proper operation of each module by means of an active control of input and output voltages. A small-signal model of the modular architecture is proposed and a decoupled control loops' scheme is used to implement the control strategy. An experimental setup has been built in order to validate the model of the DAB converter in ISOP connection and the proposed control strategy, taking different operating conditions and constructive parameter values into account.
引用
收藏
页码:2444 / 2455
页数:12
相关论文
共 27 条
[1]   Power-Loss Breakdown of a 750-V 100-kW 20-kHz Bidirectional Isolated DC-DC Converter Using SiC-MOSFET/SBD Dual Modules [J].
Akagi, Hirofumi ;
Yamagishi, Tatsuya ;
Tan, Nadia Mei Lin ;
Kinouchi, Shin-ichi ;
Miyazaki, Yuji ;
Koyama, Masato .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2015, 51 (01) :420-428
[2]  
[Anonymous], 2006, PROC 37 IEEE POWER E, DOI DOI 10.1109/PESC.2006.1712096
[3]   Active input-voltage and load-current sharing in input-series and output-parallel connected modular DC-DC converters using dynamic input-voltage reference scheme [J].
Ayyanar, R ;
Giri, R ;
Mohan, N .
IEEE TRANSACTIONS ON POWER ELECTRONICS, 2004, 19 (06) :1462-1473
[4]   Fault tolerant circuit topology and control method for input-series and output-parallel modular dc-dc converters [J].
Choudhary, Vijay ;
Ledezma, Enrique ;
Ayyanar, Raja ;
Button, Robert M. .
IEEE TRANSACTIONS ON POWER ELECTRONICS, 2008, 23 (01) :402-411
[5]   A 3-PHASE SOFT-SWITCHED HIGH-POWER-DENSITY DC-DC CONVERTER FOR HIGH-POWER APPLICATIONS [J].
DEDONCKER, RWAA ;
DIVAN, DM ;
KHERALUWALA, MH .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 1991, 27 (01) :63-73
[6]   Piecewise Linear Model for Snubberless Dual Active Bridge Commutation [J].
Farhangi, Babak ;
Toliyat, Hamid A. .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2015, 51 (05) :4072-4078
[7]   A Comparative Study of Multicell Amplifiers for AC-Power-Source Applications [J].
Gong, Guanghai ;
Hassler, Dominik ;
Kolar, Johann W. .
IEEE TRANSACTIONS ON POWER ELECTRONICS, 2011, 26 (01) :149-164
[8]   A Power Efficiency Improvement Technique for a Bidirectional Dual Active Bridge DC-DC Converter at Light Load [J].
Hirose, Toshiro ;
Takasaki, Mika ;
Ishizuka, Yoichi .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2014, 50 (06) :4047-4055
[9]   A new interleaved series input parallel output (ISIPO) forward converter with inherent demagnetizing features [J].
Jin, Taotao ;
Zhang, Katherine ;
Zhang, Kan ;
Smedley, Keyue .
IEEE TRANSACTIONS ON POWER ELECTRONICS, 2008, 23 (02) :888-895
[10]   PERFORMANCE CHARACTERIZATION OF A HIGH-POWER DUAL ACTIVE BRIDGE DC-TO-DC-CONVERTER [J].
KHERALUWALA, MH ;
GASCOIGNE, RW ;
DIVAN, DM ;
BAUMANN, ED .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 1992, 28 (06) :1294-1301