On oblique contact of creeping solids

Oblique indentation of power-law creeping solids by a rigid die is analysed in three dimensions with perfectly plastic behaviour emerging as an asymptotic case. Indenter profiles are prescribed to be axisymmetric for simplicity but not by necessity. Invariance and generality is aimed at, as the problem is governed by only four essential parameters, i.e. the die profile, p, the indentation angle, gamma, the power-law exponent, n, and the coefficient of friction, mu. The solution strategy is based on a self-similar transformation resulting in a reduced problem corresponding to flat die indentation of complete contact. The reduced auxiliary problem, being independent of loading, history and time, was solved by a three-dimensional finite element analysis characterized by high accuracy. Subsequently, cumulative superposition was used to resolve the original problem and global and invariant relations between force, depth and contact area were determined. Detailed results are given for the location and shape of the contact region and stick/slip contours as well as for local states of surface stresses and deformation at flat and spherical indenters. Due to the asymmetry prevailing, it was found that in the spherical case, contact contours proved to be oval and shifted, although with normal and tangential forces only weakly coupled. Finite friction as compared to full adhesion proved to have only a minor effect on global relations. The framework laid down may be applied to the contact of structural assemblies subjected especially to elevated temperatures and also to various issues such as compaction of powder aggregates, flattening of rough surfaces and plastic impact. (C) 2002 Elsevier Science Ltd. All rights reserved.