Multifunctional Calcium-Deficient Hydroxyl Apatite-Alginate Core-Shell-Structured Bone Substitutes as Cell and Drug Delivery Vehicles for Bone Tissue Regeneration

被引:27
作者
Raja, Naren [1 ]
Park, Honghyun [1 ]
Choi, Yeong-Jin [1 ]
Yun, Hui-suk [1 ,2 ]
机构
[1] Korea Inst Mat Sci KIMS, Dept Adv Biomat Res, Ceram Mat Div, Changwon Si 51508, Gyeongsangnam D, South Korea
[2] Korea Univ Sci & Technol UST, Daejeon 305350, South Korea
关键词
microbeads; ceramic/hydrogel; cell and drug delivery; osteoporotic; bone tissue regeneration; POROUS COMPOSITE SCAFFOLD; BIOCERAMICS; MICROCAPSULES; MICROSPHERES; IMPLANTS; RELEASE; DESIGN; TCP;
D O I
10.1021/acsbiomaterials.0c01341
中图分类号
TB3 [工程材料学]; R318.08 [生物材料学];
学科分类号
082905 [生物质能源与材料]; 100103 [病原生物学];
摘要
In this work, we fabricated unique coiled-structured bioceramics contained in hydrogel beads for simultaneous drug and cell delivery using a combination of bone cement chemistry and bioprinting and characterized them. The core of the calcium-deficient hydroxyl apatite (CDHA) contains quercetin, which is a representative phytoestrogen isolated from onions and apples, to control the metabolism of bone tissue regeneration through sustained release over a long period of time. The shell consists of an alginate hydrogel that includes preosteoblast MC3T3-E1 cells. Ceramic paste and hydrogel were simultaneously extruded to fabricate core-shell beads through the inner and outer nozzles, respectively, of a concentric nozzle system based on a material-extruding-based three-dimensional (3D) printing system. The formation of beads and the coiled ceramic core is related to both alginate concentration and printing conditions. The size of the microbeads and the thickness of the coiled structure could be controlled by adjusting the nozzle conditions. The whole process was carried out at physiological conditions (37 degrees C) to be gentle on the cells. The alginate shell undergoes solidification by cross-linking in CaCl2 or monocalcium phosphate monohydrate (MCPM) solution, while the hardening and cementation of the alpha-tricalcium phosphate (alpha-TCP) core to CDHA are subsequently initiated by immersion in phosphate-buffered saline solution. This process replaces the typical sintering of ceramic processing to prevent damage to the hydrogel, cells, and drugs in the beads. The cell-loaded beads were then cultured in cell culture media where the cells could maintain good viability during the entire testing period, which was over 50 days. Cell growth and elongation were observed even in the alginate along the CDHA coiled structure over time. Sustained release of quercetin without any initial burst was also confirmed during a test period of 120 days. These novel structured microbeads with multibiofunctionality can be used as new bone substitutes for hard tissue regeneration in indeterminate defect sites.
引用
收藏
页码:1123 / 1133
页数:11
相关论文
共 45 条
[1]
Aberg J., 2011, International Journal of Nano and Biomaterials, V3, P203, DOI 10.1504/IJNBM.2011.042130
[2]
Nanostructured bioceramics for maxillofacial applications [J].
Adamopoulos, Othon ;
Papadopoulos, Triantafillos .
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 2007, 18 (08) :1587-1597
[3]
Biomaterial strategies for engineering implants for enhanced osseointegration and bone repair [J].
Agarwal, Rachit ;
Garcia, Andres J. .
ADVANCED DRUG DELIVERY REVIEWS, 2015, 94 :53-62
[4]
3D plotting of growth factor loaded calcium phosphate cement scaffolds [J].
Akkineni, Ashwini Rahul ;
Luo, Yongxiang ;
Schumacher, Matthias ;
Nies, Berthold ;
Lode, Anja ;
Gelinsky, Michael .
ACTA BIOMATERIALIA, 2015, 27 :264-274
[5]
Osteoinduction by Foamed and 3D-Printed Calcium Phosphate Scaffolds: Effect of Nanostructure and Pore Architecture [J].
Barba, Albert ;
Diez-Escudero, Anna ;
Maazouz, Yassine ;
Rappe, Katrin ;
Espanol, Montserrat ;
Montufar, Edgar B. ;
Bonany, Mar ;
Sadowska, Joanna M. ;
Guillern-Marti, Jordi ;
Ohman-Magi, Caroline ;
Persson, Cecilia ;
Manzanares, Maria-Cristina ;
Franch, Jordi ;
Ginebra, Maria-Pau .
ACS APPLIED MATERIALS & INTERFACES, 2017, 9 (48) :41722-41736
[6]
Surface Engineering for Bone Implants: A Trend from Passive to Active Surfaces [J].
Bosco, Ruggero ;
Van den Beucken, Jeroen ;
Leeuwenburgh, Sander ;
Jansen, John .
COATINGS, 2012, 2 (03) :95-119
[7]
A biodegradable porous composite scaffold of PGA/β-TCP for bone tissue engineering [J].
Cao, Hong ;
Kuboyama, Noboru .
BONE, 2010, 46 (02) :386-395
[8]
Sintering of calcium phosphate bioceramics [J].
Champion, E. .
ACTA BIOMATERIALIA, 2013, 9 (04) :5855-5875
[9]
Continuous digital light processing (cDLP): Highly accurate additive manufacturing of tissue engineered bone scaffolds This paper highlights the main issues regarding the application of Continuous Digital Light Processing (cDLP) for the production of highly accurate PPF scaffolds with layers as thin as 60 mu m for bone tissue engineering [J].
Dean, David ;
Wallace, Jonathan ;
Siblani, Ali ;
Wang, Martha O. ;
Kim, Kyobum ;
Mikos, Antonios G. ;
Fisher, John P. .
VIRTUAL AND PHYSICAL PROTOTYPING, 2012, 7 (01) :13-24
[10]
Manufacture of macroporous β-tricalcium phosphate bioceramics [J].
Descamps, M. ;
Duhoo, T. ;
Monchau, F. ;
Lu, J. ;
Hardouin, P. ;
Hornez, J. C. ;
Leriche, A. .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2008, 28 (01) :149-157