Viscous flow and microforming of a Zr-base bulk metallic glass

被引：21

作者：

Jang, Jason S. C. ^{[1
]}

Chang, C. F. ^{[1
]}

Huang, Y. C. ^{[1
]}

Huang, J. C. ^{[2
]}

Chiang, W. J. ^{[3
]}

Liu, C. T. ^{[4
]}

机构：

[1] I Shou Univ, Dept Mat Sci & Engn, Kaohsiung 840, Taiwan

[2] Natl Sun Yat Sen Univ, Inst Mat Sci & Engn, Ctr Nanosci & Nanotechnol, Kaohsiung 840, Taiwan

[3] Met Ind Res & Dev Ctr, Kaohsiung 840, Taiwan

[4] Univ Tennessee, Dept Mat Sci & Engn, Knoxville, TN 37996 USA

来源：

INTERMETALLICS | 2009年 / 17卷 / 04期

关键词：

Glasses; metallic; Superplastic behavior; Plastic forming; hot; Diffraction; THERMAL-STABILITY; FATIGUE; ALLOYS;

D O I：

10.1016/j.intermet.2008.07.019

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

The thermal plastic deformation behavior of the (Zr53Cu30Ni9Al8)(99.5)Si-0.5 bulk metallic glass (BMG) was studied by means of thermo mechanical analysis (TMA) and high-temperature compression test in the supercooled liquid region. Using the result obtained from TMA, the deformation behavior for (Zr53Cu30Ni9Al8)(99.5)Si-0.5 BMG rod was investigated by compression test at different strain rates (5 x 10(-3) similar to 5 x 10(-1) s(-1)) and temperatures in the supercooled liquid region, specifically at 733 K, 738 K, 743 K, 748 K, and 753 K. The value of flow stress with a constant strain rate of 5 x 10(-3) s(-1) decreases with increasing temperature and reaches a relatively low flow stress of 36 MPa at the test temperature of 753 K. Conversely, the value of flow stress increases with the strain rate in compression. In this paper, an imprinted hologram pattern with 0.6 mu m depth was demonstrated which showed extremely good microforming ability of this (Zr53Cu30Ni9Al8)(99.5)Si-0.5 BMG in the supercooled liquid region. (C) 2008 Elsevier Ltd. All rights reserved.

引用

页码：200 / 204

页数：5

共 21 条

[1] MECHANICAL STRENGTH AND THERMAL-STABILITY OF TI-BASED AMORPHOUS-ALLOYS WITH LARGE GLASS-FORMING ABILITY [J].

AMIYA, K ;

NISHIYAMA, N ;

INOUE, A ;

MASUMOTO, T .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1994, 179 :692-696

[2] Nanoimprint of gratings on a bulk metallic glass [J].

Chu, J. P. ;

Wijaya, H. ;

Wu, C. W. ;

Tsai, T. R. ;

Wei, C. S. ;

Nieh, T. G. ;

Wadsworth, Jeffrey .

APPLIED PHYSICS LETTERS, 2007, 90 (03)

[3] Plastic flow and tensile ductility of a bulk amorphous Zr55Al10Cu30Ni5 alloy at 700 K [J].

Chu, JP ;

CHiang, CL ;

Mahalingam, T ;

Nieh, TG .

SCRIPTA MATERIALIA, 2003, 49 (05) :435-440

[4] Fatigue of a Zr-Ti-Cu-Ni-Be bulk amorphous metal: Stress/life and crack-growth behavior [J].

Gilbert, CJ ;

Lippmann, JM ;

Ritchie, RO .

SCRIPTA MATERIALIA, 1998, 38 (04) :537-542

[5] Mechanisms for fracture and fatigue-crack propagation in a bulk metallic glass [J].

Gilbert, CJ ;

Schroeder, V ;

Ritchie, RO .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1999, 30 (07) :1739-1753

[6] Improved thermal stability of amorphous ZrAlCuNi alloys with Si and B [J].

Hung, T. H. ;

Huang, J. C. ;

Jang, J. S. C. ;

Lu, S. C. .

MATERIALS TRANSACTIONS, 2007, 48 (02) :239-243

[7] Recent progress in bulk glassy, nanoquasicrystalline and nanocrystalline alloys [J].

Inoue, A ;

Takeuchi, A .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 375 (1-2 SPEC. ISS.) :16-30

[8] Cobalt-based bulk glassy alloy with ultrahigh strength and soft magnetic properties [J].

Inoue, A ;

Shen, BL ;

Koshiba, H ;

Kato, H ;

Yavari, AR .

NATURE MATERIALS, 2003, 2 (10) :661-663

[9]

Inoue A., 1998, BULK AMORPHOUS ALLOY

[10] Crystallization kinetics and thermal stability of the Zr60Al7.5Cu17.5Ni10Si4B1 amorphous alloy studied by isothermal differential scanning calorimetry and transmission electron microscopy [J].

Jang, J. S. C. ;

Wang, I. H. ;

Chang, L. J. ;

Chen, G. J. ;

Hung, T. H. ;

Huang, J. C. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 449 :511-516

← 1 2 3 →