Dynamic CAD objects for structural optimization in preliminary aircraft design

被引：52

作者：

Ledermann, Christof ^{[1
]}

Ermanni, Paolo

Kelm, Roland

机构：

[1] ETH, Ctr Struct Technol, CH-8092 Zurich, Switzerland

[2] Airbus Germany GmbH, Mass Properties EGW, D-21129 Hamburg, Germany

来源：

AEROSPACE SCIENCE AND TECHNOLOGY | 2006年 / 10卷 / 07期

关键词：

preliminary design; dynamic objects; knowledge pattern; structural optimization; CAD-based topology optimization;

D O I：

10.1016/j.ast.2006.07.001

中图分类号：

V [航空、航天];

学科分类号：

08 [工学]; 0825 [航空宇航科学与技术];

摘要：

Two new concepts for supporting CAD of repetitively stiffened structures are presented. The two concepts are called D-operator and K-operator, respectively. They have been developed to support preliminary aircraft design and are therefore illustrated by using typical aircraft structures. However, the methods could be applied to any repetitive CAD structure. Cooperation with the software supplier made it possible to implement the K-operator professionally. Sample structures generated with this concept will be illustrated and the results of a CAD based optimization using dynamic objects will be discussed. An outlook will give some ideas for further development and improvements of the method. (c) 2006 Elsevier Masson SAS. All rights reserved.

引用

页码：601 / 610

页数：10

共 14 条

[1]

GENERATING OPTIMAL TOPOLOGIES IN STRUCTURAL DESIGN USING A HOMOGENIZATION METHOD [J].

BENDSOE, MP ;

KIKUCHI, N .

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 1988, 71 (02) :197-224

[2]

BIANCONI F, 2001, 12 ADM INT C IT SEPT

[3]

HEINZE W, 2002, MULTIDISZIPLINARES F

[4]

KONIG O, 2004, THESIS ETH

[5]

Associative parametric CAE methods in the aircraft pre-design [J].

Ledermann, C ;

Hanske, C ;

Wenzel, J ;

Ermanni, P ;

Kelm, R .

AEROSPACE SCIENCE AND TECHNOLOGY, 2005, 9 (07) :641-651

[6]

Ledermann C, 2005, I C COMP AID DES CON, P442

[7]

LUBIS A, 1992, DGLR JAHR 1992 BREM

[8]

LUO X, 1996, 37 AIAA ASME ASCE AH

[9]

MECHLER H, 2002, THESIS TU MUNCHEN

[10]

Niu M. C. Y., 1988, AIRFRAME STRUCTURAL

← 1 2 →