Formulation of a hybrid calibration approach for a physically based distributed model with NEXRAD data input

被引:55
作者
Di Luzio, M
Arnold, JG
机构
[1] Texas A&M Univ Syst, Texas Agr Expt Stn, Blackland Res Ctr, Temple, TX 76502 USA
[2] USDA ARS, Grassland Res Lab, Temple, TX 76502 USA
关键词
simulation; pollution; GIS; non-point source;
D O I
10.1016/j.jhydrol.2004.03.034
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
This paper describes the background, formulation and results of an hourly input-output calibration approach proposed for the Soil and Water Assessment Tool (SWAT) watershed model, presented for 24 representative storm events occurring during the period between 1994 and 2000 in the Blue River watershed (1233 km(2) located in Oklahoma). This effort is the first follow up to the participation in the National Weather Service-Distributed Modeling Intercomparison Project (DMIP), an opportunity to apply, for the first time within the SWAT modeling framework, routines for hourly stream flow prediction based on gridded precipitation (NEXRAD) data input. Previous SWAT model simulations, uncalibrated and with moderate manual calibration (only the water balance over the calibration period), were provided for the entire set of watersheds and associated outlets for the comparison designed in the DMIP project. The extended goal of this follow up was to verify the model efficiency in simulating hourly hydrographs calibrating each storm event using the formulated approach. This included a combination of a manual and an automatic calibration approach (Shuffled Complex Evolution Method) and the use of input parameter values allowed to vary only within their physical extent. While the model provided reasonable water budget results with minimal calibration, event simulations with the revised calibration were significantly improved. The combination of NEXRAD precipitation data input, the soil water balance and runoff equations, along with the calibration strategy described in the paper, appear to adequately describe the storm events. The presented application and the formulated calibration method are initial steps toward the improvement of the simulation on an hourly basis of the SWAT model loading variables associated with the storm flow, such as sediment and pollutants, and the success of Total Maximum Daily Load (TMDL) projects. (C) 2004 Elsevier B.V. All rights reserved.
引用
收藏
页码:136 / 154
页数:19
相关论文
共 38 条
[1]  
[Anonymous], MUUF V2 14 USERS MAN
[2]   Large area hydrologic modeling and assessment - Part 1: Model development [J].
Arnold, JG ;
Srinivasan, R ;
Muttiah, RS ;
Williams, JR .
JOURNAL OF THE AMERICAN WATER RESOURCES ASSOCIATION, 1998, 34 (01) :73-89
[3]   Continental scale simulation of the hydrologic balance [J].
Arnold, JG ;
Srinivasan, R ;
Muttiah, RS ;
Allen, PM .
JOURNAL OF THE AMERICAN WATER RESOURCES ASSOCIATION, 1999, 35 (05) :1037-1051
[4]   AUTOMATED BASE-FLOW SEPARATION AND RECESSION ANALYSIS TECHNIQUES [J].
ARNOLD, JG ;
ALLEN, PM ;
MUTTIAH, R ;
BERNHARDT, G .
GROUND WATER, 1995, 33 (06) :1010-1018
[5]   A COMPREHENSIVE SURFACE-GROUNDWATER FLOW MODEL [J].
ARNOLD, JG ;
ALLEN, PM ;
BERNHARDT, G .
JOURNAL OF HYDROLOGY, 1993, 142 (1-4) :47-69
[6]  
ARNOLD JG, 2002, 2002 ASAE ANN INT M
[8]   Toward improved calibration of hydrologic models: Combining the strengths of manual and automatic methods [J].
Boyle, DP ;
Gupta, HV ;
Sorooshian, S .
WATER RESOURCES RESEARCH, 2000, 36 (12) :3663-3674
[9]  
Cunge J. A., 1969, Journal of Hydraulic Research, V7, P205, DOI DOI 10.1080/00221686909500264
[10]  
Di Luzio M., 2004, T GIS, V8, P113, DOI [DOI 10.1111/J.1467-9671.2004.00170.X, 10.1111/j.1467-9671.2004.00170.x]