Comparative study of the deformation behavior of hexagonal magnesium-lithium alloys and a conventional magnesium AZ31 alloy

被引：166

作者：

Al-Samman, T. ^{[1
]}

机构：

[1] Rhein Westfal TH Aachen, Inst Met Kunde & Met Phys, D-52056 Aachen, Germany

来源：

ACTA MATERIALIA | 2009年 / 57卷 / 07期

关键词：

Texture; Slip; Twinning; Plastic deformation; Ductility; DYNAMIC RECRYSTALLIZATION; ROOM-TEMPERATURE; PRISMATIC SLIP; MECHANISMS; TEXTURE; LI; MG;

D O I：

10.1016/j.actamat.2009.01.031

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Specimens of a conventional magnesium AZ31 alloy and a binary alpha-solid solution Mg4Li alloy with similar starting textures and microstructure were subjected to plane strain deformation under various deformation temperatures ranging from 298 K to 673 K. Lithium addition to magnesium exhibited remarkable room temperature ductility improvement owing to enhanced activity of non-basal slip, particularly, < c + a >-slip mode. Furthermore, the addition of lithium to magnesium seemed to reduce the plastic anisotropy, typical for commercial magnesium alloys. This was evident in the flow curves and texture development obtained at 200 degrees C and 400 degrees C. At 400 degrees C prismatic slip gains strong influence in accommodating the imposed deformation. In terms of thermal stability against microstructure coarsening at elevated temperatures, the lithium containing alloy undergoes significant grain growth following recrystallization. (C) 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

引用

页码：2229 / 2242

页数：14

共 22 条

[1] Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y
Agnew, SR
Yoo, MH
Tomé, CN
[J]. ACTA MATERIALIA, 2001, 49 (20) : 4277 - 4289
[2] Transmission electron microscopy investigation of ⟨c+a⟩ dislocations in Mg and α-solid solution Mg-Li alloys
Agnew, SR
Horton, JA
Yoo, MH
[J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2002, 33 (03): : 851 - 858
[3] AHMADIEH A, 1965, T METALL SOC AIME, V233, P1130
[4] Room temperature formability of a magnesium AZ31 alloy: Examining the role of texture on the deformation mechanisms
Al-Samman, T.
Gottstein, G.
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 488 (1-2): : 406 - 414
[5] Dynamic recrystallization during high temperature deformation of magnesium
Al-Samman, T.
Gottstein, G.
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 490 (1-2): : 411 - 420
[6] TENSILE-COMPRESSIVE YIELD ASYMMETRIES IN HIGH-STRENGTH WROUGHT MAGNESIUM ALLOYS
BALL, EA
PRANGNELL, PB
[J]. SCRIPTA METALLURGICA ET MATERIALIA, 1994, 31 (02): : 111 - 116
[7] ODF CALCULATION BY SERIES EXPANSION FROM INCOMPLETELY MEASURED POLE FIGURES USING THE POSITIVITY CONDITION .1. CUBIC-CRYSTAL SYMMETRY
DAHMS, M
BUNGE, HJ
[J]. TEXTURES AND MICROSTRUCTURES, 1987, 7 (03): : 171 - 185
[8] Influence of texture on dynamic recrystallization and deformation mechanisms in rolled or ECAPed AZ31 magnesium alloy
del Valle, J. A.
Ruano, O. A.
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 487 (1-2): : 473 - 480
[9] EMLEY EF, 1966, PRINCIPLES MAGNESIUM, P47603
[10] Study of the mechanical properties of Mg-7.7at.% Al by in-situ neutron diffraction
Gharghouri, MA
Weatherly, GC
Embury, JD
Root, J
[J]. PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 1999, 79 (07): : 1671 - 1695

← 1 2 3 →