A simulation model for heat pump dryer plants for fruits and roots.

Dryer design requires food properties, drying rate and mass-heat transfer coefficients. These values change continuously during drying due to changes in food fractions, particularly the water fraction. The high energy demand and costs allied to inefficient devices, creates a great need for new processing equipment. Along these guide-lines, several heat pump dry-ng research projects were established at the Norwegian University of Science and Technology. The heat pump dryer provides high quality final product as its drying conditions can be controlled. Its efficiency and non-polluting operation come from closed air-refrigerant circuits and from its ability to fully recover the latent heat of moist air as it exits the drying chamber. Most of the above features are quite the opposite of the conventional dryer characteristics. Several experiments were made on heat pump drying of fruits and roots at temperatures from -22.5 to 40 degrees C to obtain data and correlations on thermophysical properties, specific enthalpy and rehydration. Also, tests were done on drying rate, moisture content, drying constant, effective mass diffusivity and heat and mass transfer equations. The next important phase is the development of a simulation model to predict the performance and characteristics of the heat pump dryer plant. The objectives of the present work are to develop and to test a heat pump dryer simulation model. The simulation provides results on the characteristics of both plant and components which are integrated by heat and mass transfer equations. The program has menus with click-on icons, input and output pop-up dialogue boxes. The usual commands such as, file-open, file-save, edit-delete are available in this program simply called Hpdryer. The model contains moist air psychrometric, natural and conventional refrigerant property libraries. Ammonia is a time-tested, self-alarming and natural refrigerant. It has been used extensively in the past, and ii has better thermodynamic and transport properties than halocarbons. Safety is easily attained by design and its restrictive standards have helped increase its use in several countries. There are 36 ammonia installations in Norway and in the United Kingdom, including a drying plant. Ammonia has zero Odp, zero Gwp and the recent R&D has led to viable small-scale heat pump plants. Ammonia and dichlorodifluoromethane refrigerants were used in the test cases simulated by Hpdryer model.