Pulsed eddy current system for dynamic inspection of defects

被引:13
作者
Tian, GY [1 ]
Sophian, A
Taylor, D
Rudlin, J
机构
[1] Univ Huddersfield, Huddersfield HD1 3DH, W Yorkshire, England
[2] TWI, Struct Integr Dept, Cambridge CB1 6AL, England
关键词
D O I
10.1784/insi.46.5.256.55559
中图分类号
TH7 [仪器、仪表];
学科分类号
0804 ; 080401 ; 081102 ;
摘要
Pulsed Eddy Current (PEC) techniques have been investigated and applied for field applications. On-line inspection is essential for many manufacturing processes and other NDE applications. This paper investigates the dynamic behaviour of pulsed eddy current techniques and the feasibility, of their use in an on-line inspection system. After discussing the PEC principles and their signal signatures, an approach on improving the dynamic response of PEC is introduced and tested. The results have illustrated that the proposed PEC system and their feature extraction can be used for real-time inspection such as NDT for manufacturing processes.
引用
收藏
页码:256 / 259
页数:4
相关论文
共 11 条
[1]   Pulsed eddy current technology:: Characterizing material loss with gap and lift-off variations [J].
Giguère, S ;
Lepine, BA ;
Dubois, JMS .
RESEARCH IN NONDESTRUCTIVE EVALUATION, 2001, 13 (03) :119-129
[2]  
GIGUERE S, 2000, REV PROGR QUANTITATI, P459
[3]   Pulsed eddy current signal analysis: Application to the experimental detection and characterization of deep flaws in highly conductive materials [J].
Lebrun, B ;
Jayet, Y ;
Baboux, JC .
NDT & E INTERNATIONAL, 1997, 30 (03) :163-170
[4]  
LEPINE BA, 2002, REV PROGR QNDE, V21, P415
[5]  
LEPINE BA, 1998, PACNDT 98
[6]  
MOULDER JC, 1998, MAT RES SOC S
[7]  
SMITH RA, 2001, DETECTION DEEP CORRO
[8]  
Sophian A, 2003, LASER METROLOGY AND MACHINE PERFORMANCE VI, P381
[9]   A feature extraction technique based on principal component analysis for pulsed Eddy current NDT [J].
Sophian, A ;
Tian, GY ;
Taylor, D ;
Rudlin, J .
NDT & E INTERNATIONAL, 2003, 36 (01) :37-41
[10]  
Sophian A, 2001, INSIGHT, V43, P302