A simplified method for the extrinsic calibration of structured-light sensors using a single-ball target

被引：38

作者：

Xie, ZX ^{[1
]}

Zhang, CG ^{[1
]}

Zhang, QM ^{[1
]}

机构：

[1] Ocean Univ China, Coll Engn, Qingdao 266071, Peoples R China

来源：

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 2004年 / 44卷 / 11期

关键词：

structured-light sensor; extrinsic calibration; single-ball target; mathematical model;

D O I：

10.1016/j.ijmachtools.2004.03.012

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this paper, a sing] e-ball-target-based approach is presented for the extrinsic calibration of a multiple-axis, structured-light scanning system. Since the output of the structured-light sensor is 2D data, the system mathematical model is directly built as the transformation from 2D sensor coordinate system (laser plane) to Cartesian world coordinate system, not 3D non-orthogonal skewed coordinate system to Cartesian world coordinate system. By measuring a fixed point (ball center) using the sensor, "conjugate pairs" are identified for solving this model. An algorithm for determining the position of the CMM scanning axis where the laser plane passes through the ball center is proposed to enable this sensor to measure the fixed point. The calibration procedure facilitates on-line use. Experiments show that the calculation accuracy of the transformation matrix is adequate for common use. (C) 2004 Elsevier Ltd. All rights reserved.

引用

页码：1197 / 1203

页数：7

共 8 条

[1]

AGIN GJ, 1985, P IEEE INT C ROB AUT

[2] Modeling and calibration of a structured-light optical CMM via skewed frame representation [J].

Che, CG ;

Ni, J .

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 1996, 118 (04) :595-603

[3] A ball-target-based extrinsic calibration technique for high-accuracy 3-D metrology using off-the-shelf laser-stripe sensors [J].

Che, CG ;

Ni, J .

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2000, 24 (03) :210-219

[4]

CHEN CH, 1987, P 1987 IEEE INT C RO, V3, P807

[5] CALIBRATION OF A CAMERA AND LIGHT-SOURCE BY FITTING TO A PHYSICAL MODEL [J].

MANSBACH, P .

COMPUTER VISION GRAPHICS AND IMAGE PROCESSING, 1986, 35 (02) :200-219

[6] A 3-D VISION SYSTEM MODEL FOR AUTOMATIC OBJECT SURFACE SENSING [J].

THEODORACATOS, VE ;

CALKINS, DE .

INTERNATIONAL JOURNAL OF COMPUTER VISION, 1993, 11 (01) :75-99

[7] A novel calibration approach to structured light 3D vision inspection [J].

Zhang, GJ ;

Wei, ZZ .

OPTICS AND LASER TECHNOLOGY, 2002, 34 (05) :373-380

[8] Study on laser stripe sensor [J].

Zhang, JX ;

Djordjevich, A .

SENSORS AND ACTUATORS A-PHYSICAL, 1999, 72 (03) :224-228

← 1 →