Partial phase relationships of Mg-Zn-Ce system at 350 °C

被引:17
作者
Huang Ming-li [1 ,2 ]
Li Hong-xiao [1 ]
Ding Hua [1 ]
Ren Yu-ping [1 ]
Qin Gao-wu [1 ]
Hao Shi-ming [1 ]
机构
[1] Northeastern Univ, Sch Met & Mat, Minist Educ, Key Lab Anisotropy & Texture Mat, Shenyang 110004, Peoples R China
[2] Northeastern Univ Qinhuangdao, Dept Mat Sci & Engn, Qinhuangdao 110004, Peoples R China
基金
中国国家自然科学基金;
关键词
Mg-Zn-Ce system; phase equilibrium; two-phase region; three-phase region; T-phase; MECHANICAL-PROPERTIES; ALLOYS; MAGNESIUM;
D O I
10.1016/S1003-6326(08)60333-7
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The alloys were prepared in Mg-rich corner of Mg-Zn-Ce system. Partial phase equilibrium relationships of these alloys at 350 degrees C were identified by using scanning electron microscopy(SEM), electron probe microanalysis(EPMA), X-ray diffraction(XRD) analysis and selected area electron diffraction(SAED) pattern analysis of transmission electron microscopy(TEM). Partial isothermal section of Mg-Zn-Ce system in Mg-rich corner was identified. The results show that there is one tertiary compound (T-phase) in Mg-Zn-Ce system. The T-phase is a linear ternary compound in which the content of Cc is about 7.7% (molar fraction); while the content of Zn is changed from 19.3% to 43.6% (molar fraction). The crystal structure of T-phase is C-centered orthorhombic. In addition, one two-phase region of Mg+T-phase and one three-phase region of Mg+7-phase+MgZn(Ce) exist in the Mg-rich corner of Mg-Zn-Ce system at 350 degrees C.
引用
收藏
页码:681 / 685
页数:5
相关论文
共 15 条
[1]  
Aghion E, 2003, MAGNESIUM TECHNOLOGY 2003, P177
[2]   The art of developing new magnesium alloys for high temperature applications [J].
Aghion, E ;
Bronfin, B ;
Eliezer, D ;
Von Buch, F ;
Schumann, S ;
Friedrich, H .
MAGNESIUM ALLOYS 2003, PTS 1 AND 2, 2003, 419-4 :407-417
[3]  
Bakke P, 2005, MAGNESIUM TECHNOLOGY 2005, P291
[4]  
BONDAREV BI, 2005, TSVETNYE METALLY, P131
[5]  
Bronfin B, 2005, MAGNESIUM TECHNOLOGY 2005, P395
[6]  
DRITS ME, 1989, RUSS METALL+, V2, P195
[7]  
[房灿峰 FANG Canfeng], 2006, [金属热处理, Heat treatment of metals], V31, P12
[8]   Microstructures and mechanical properties of Mg-Zn-RE-Ca casting alloys [J].
Jun, Joong-Hwan ;
Park, Bong-Koo ;
Kim, Jeong-Min ;
Kim, Ki-Tae ;
Jung, Woon-Jae .
ECO-MATERIALS PROCESSING & DESIGN VII, 2006, 510-511 :214-217
[9]  
LI Q, 2007, ALLOYS COMPOUNDS, V427, P115
[10]  
MASSALSKI TB, 1996, BINARY ALLOY PHASE D