Conceptual design of the quench protection circuits for the JT-60SA superconducting magnets

被引：21

作者：

Gaio, Elena ^{[1
]}

Novello, Luca ^{[1
]}

Piovan, Roberto ^{[1
]}

Shimada, Katsuhiro ^{[2
]}

Terakado, Tsunehisa ^{[2
]}

Kurihara, Kenichi ^{[2
]}

Matsukawa, Makoto ^{[2
]}

机构：

[1] EURATOM ENEA Assoc, Consorzio RFX, I-35127 Padua, Italy

[2] Japan Atom Energy Agcy, Naka Fus Inst, Naka, Ibaraki 3110193, Japan

来源：

FUSION ENGINEERING AND DESIGN | 2009年 / 84卷 / 2-6期

关键词：

QPC; IGCT; CB; JT-60SA; SYSTEM;

D O I：

10.1016/j.fusengdes.2008.12.100

中图分类号：

TL [原子能技术]; O571 [原子核物理学];

学科分类号：

0827 ; 082701 ;

摘要：

In JT-60SA, the new satellite tokamak to be built in Naka, Japan. the magnetic field for plasma generation and confinement is produced by a number of superconducting coils whose rated Current ranges from 20 kA to 25.7 kA, with a nominal voltage up to 5 kV. This paper deals with the conceptual design of the Quench Protection Circuits (QPC) of JT-60SA, which must provide a fast removal of the energy stored in the Superconducting coils in case of quench. The core of the QPC units is based on a dc current breaker, which diverts the coil current into a discharge resistor. Different concepts of dc circuit breaker for QPC were considered, including vacuum and static circuit breakers; then, a hybrid solution, composed of a mechanical bypass switch paralleled to a static switch based on Integrated Gate Commutated Thyristor (IGCT) technology, has been worked out. A pyrobreaker is added in series to the hybrid switch as a backup protection. The resulting design allows benefiting from the fast breaking and very low maintenance requirement of the static switches, besides maintaining the advantage of the much lower power losses of the mechanical bypass in normal operation. After a brief presentation of the preliminary Studies, the selected design Solution for JT-60SA is presented in detail. (C) 2009 EFDA-Jet. Published by Elsevier B.V. All rights reserved.

引用

页码：804 / 809

页数：6

共 15 条

[1]

*ABB, 5SHY35L4512 ABB IGCT

[2]

*ABB, 5SHY42L6500 ABB IGCT

[3] The European development of a full scale switching unit for the ITER switching and discharging networks [J].

Bonicelli, T ;

De Lorenzi, A ;

Hrabal, D ;

Piovan, R ;

Sachs, E ;

Salpietro, E ;

Shaw, SR .

FUSION ENGINEERING AND DESIGN, 2005, 75-79 :193-200

[4] Quench protection system using a novel dc circuit breaker for LHD [J].

Chikaraishi, H ;

Tanahashi, S ;

Yamada, S ;

Yamamoto, J ;

Motojima, O ;

Satoh, T ;

Niwa, H .

FUSION ENGINEERING AND DESIGN, 1998, 41 :259-264

[5] Status of JT-60SA tokamak under the EU-JA Broader Approach Agreement [J].

Matsukawa, M. ;

Kikuchi, M. ;

Fujii, T. ;

Fujita, T. ;

Hayashi, T. ;

Higashijima, S. ;

Hosogane, N. ;

Ikeda, Y. ;

Ide, S. ;

Ishida, S. ;

Kamada, Y. ;

Kimura, H. ;

Kizu, K. ;

Lurihara, K. ;

Kurita, G. ;

Masaki, K. ;

Matsunaga, G. ;

Miya, N. ;

Moriyama, S. ;

Sakasai, A. ;

Sakurai, S. ;

Shibama, Y. K. ;

Shimada, K. ;

Sukegawa, A. ;

Suzuki, T. ;

Suzuki, Y. ;

Takase, Y. ;

Takechi, M. ;

Tamai, H. ;

Tsuchiya, K. ;

Urano, H. ;

Yamamoto, T. ;

Yoshida, K. ;

Andreani, R. ;

Alonso, J. ;

Barabaschi, R. ;

Botija, J. ;

Cara, P. ;

Coletti, A. ;

Coletti, R. ;

Costa, R. ;

Cucchiaro, A. ;

Decool, R. ;

Della Corte, A. ;

Dolgetta, N. ;

Duchateau, J. -L. ;

Fietz, W. H. ;

Gaio, E. ;

Grosman, A. ;

Gruber, O. .

FUSION ENGINEERING AND DESIGN, 2008, 83 (7-9) :795-803

[6]

MOHAN N, 1989, POWER ELECT, P730

[7] ITER R&D: Auxiliary systems: Coil power supply components [J].

Mondino, PL ;

Bonicelli, T ;

Kuchinskiy, V ;

Roshal, A .

FUSION ENGINEERING AND DESIGN, 2001, 55 (2-3) :325-330

[8]

NEUMEYER C, 1995, P 16 SOFE OCT, V2, P1275

[9]

NOVELLO L, IEEE T APPL IN PRESS

[10]

OEDEGARD B, 2001, P PCIM 2001 C CHIC U

← 1 2 →