Creep effects on the spallation of an alumina layer from a NiCrAlY coating

被引:37
作者
Evans, HE
Strawbridge, A
Carolan, RA
Ponton, CB
机构
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 1997年 / 225卷 / 1-2期
关键词
alumina layer; creep deformation; spallation;
D O I
10.1016/S0921-5093(96)10881-9
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
A finite-element analysis has been performed of alumina spallation by wedge cracking from a flat Nil6Cr6A1Y coating substrate during cooling from 1100 degrees C. The analysis allowed for creep deformation within both the coating and oxide but it was found that only creep within the coating influenced the growth of the interfacial wedge crack by relaxing stresses at the crack tip. As a result, crack growth was suppressed during the early stages of cooling. Computed values of the critical temperature drop to cause spallation are presented for various cooling rates and values of the coefficient of thermal expansion of the coating. The results show that the effective fracture energy for growth of the interfacial crack in the presence of creep is some 1-2 orders of magnitude greater than previously determined values for elastic fracture of the oxide and demonstrate the important role of coating creep. These results are used to produce a first spallation map for this system. (C) 1997 Elsevier Science S.A.
引用
收藏
页码:1 / 8
页数:8
相关论文
共 26 条
  • [1] Banks J. P., 1994, MAT ADV POWER ENG 2, P1543
  • [2] A MODEL FOR STRESS GENERATION AND RELIEF IN OXIDE METAL SYSTEMS DURING A TEMPERATURE-CHANGE
    BARNES, JJ
    GOEDJEN, JG
    SHORES, DA
    [J]. OXIDATION OF METALS, 1989, 32 (5-6): : 449 - 469
  • [3] THERMAL RESIDUAL-STRESSES IN CERAMIC-MATRIX COMPOSITES .1. AXISYMMETRICAL MODEL AND FINITE-ELEMENT ANALYSIS
    BOBET, JL
    LAMON, J
    [J]. ACTA METALLURGICA ET MATERIALIA, 1995, 43 (06): : 2241 - 2253
  • [4] STRESS-RELAXATION OF LOW-PRESSURE PLASMA-SPRAYED NICRALY ALLOYS
    BRINDLEY, WJ
    WHITTENBERGER, JD
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1993, 163 (01): : 33 - 41
  • [5] BRINDLEY WJ, 1995, WORKSH THERM BARR CO
  • [6] Caplan D., 1963, CORROS SCI, V3, P161
  • [7] CESAR JMA, 1983, 44983 CR U COLL SWAN
  • [8] FINITE-ELEMENT THERMAL-STRESS SOLUTIONS FOR THERMAL BARRIER COATINGS
    CHANG, GC
    PHUCHAROEN, W
    MILLER, RA
    [J]. SURFACE & COATINGS TECHNOLOGY, 1987, 32 (1-4) : 307 - 325
  • [9] ON THE MECHANICS OF DELAMINATION AND SPALLING IN COMPRESSED FILMS
    EVANS, AG
    HUTCHINSON, JW
    [J]. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 1984, 20 (05) : 455 - 466
  • [10] Evans H.E., 1995, Solid. State Phenom., V41, P137