An experimental and numerical investigation of strength characteristics of carbon-epoxy pinned-joint plates

被引：44

作者：

Aktas, A

Dirikolu, MH ^{[1
]}

机构：

[1] Kirikkale Univ, Dept Mech Engn, TR-71450 Kirikkale, Turkey

[2] Afyon Kocatepe Univ, Usak Engn Fac, Dept Mech Engn, Usak, Turkey

来源：

COMPOSITES SCIENCE AND TECHNOLOGY | 2004年 / 64卷 / 10-11期

关键词：

carbon fibres; mechanical properties; failure criterion; finite element analysis; joining;

D O I：

10.1016/j.compscitech.2003.11.005

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

An experimental and numerical study has been carried out to investigate the strength of a pinned-joint carbon epoxy composite plate with [0degrees/45degrees/-45degrees/90degrees]s and [90degrees/45degrees/-45degrees/0degrees]s stacking configurations. The experiments were carried out according to the ASTM D953 standard [Standard Test method for Bearing Strength of Plastics, ASTM Designation, 342-346], and the numerical analyses were performed by the finite element method. The ratio of the edge distance to the pin diameter (E/D), and the ratio of the specimen width to the pin diameter (W/D) were systematically varied during analyses. The results from both analyses show firstly that the prepared specimen configurations give bearing mode, secondly that the [90degrees/45degrees/-45degrees/0degrees]s configuration is stronger when compared to [0degrees/45degrees/-45degrees/90degrees]s, and finally that both configurations reach their upper limit bearing strengths when E/D and W/D ratios are equal or greater than 4. (C) 2004 Elsevier Ltd. All rights reserved.

引用

页码：1605 / 1611

页数：7

共 22 条

[1] AKAY M, 1995, COMPOSITES, P451
[2] Failure analysis of two-dimensional carbon-epoxy composite plate pinned joint
Aktas, A
Karakuzu, R
[J]. MECHANICS OF COMPOSITE MATERIALS AND STRUCTURES, 1999, 6 (04): : 347 - 361
[3] *ASTM, 1982, 351876 ASTM
[4] *ASTM, 1981, ASTM STP, V723, P21
[5] *ASTM, 1982, 303976 ASTM
[6] *ASTM, 1982, 341075 ASTM
[7] *ASTM D, 953D ASTM D, P342
[8] BICKLEY W, 1982, PHILOS T R SOC A, V227, P383
[9] COLLINGS T, 1982, BEARING STRENGTHS CF, P241
[10] DEJANG T, 1977, J COMPOS MATER, V11, P383

← 1 2 3 →