Post combustion CO2 capture by carbon fibre monolithic adsorbents

被引:203
作者
Thiruvenkatachari, Ramesh [1 ]
Su, Shi [1 ]
An, Hui [1 ]
Yu, Xin Xiang [1 ]
机构
[1] CSIRO, Kenmore, Qld 4069, Australia
关键词
Honeycomb monolith; Carbon fibre composite adsorbent; CO2; adsorption; Flue gas; Post combustion capture; Greenhouse gas; COAL-TAR PITCH; ACTIVATED CARBON; GAS SEPARATION; MECHANICAL-PROPERTIES; POWER-GENERATION; CARBONIZATION TEMPERATURE; MEMBRANE TECHNOLOGY; HONEYCOMB MONOLITHS; OXYGEN SEPARATION; POROUS STRUCTURE;
D O I
10.1016/j.pecs.2009.05.003
中图分类号
O414.1 [热力学];
学科分类号
摘要
As generation of carbon dioxide (CO2) greenhouse gas is inherent in the combustion of fossil fuels, effective capture Of CO2 from industrial and commercial operations is viewed as an important strategy which has the potential to achieve a significant reduction in atmospheric CO2 levels. At present, there are three basic capture methods, i.e. post combustion capture, pre-combustion capture and oxy-fuel combustion. In pre-combustion, the fossil fuel is reacted with air or oxygen and is partially oxidized to form CO and H-2. Then it is reacted with steam to produce a mixture Of CO2 and more H-2. The H-2 can be used as fuel and the carbon dioxide is removed before combustion takes place. Oxy-combustion is when oxygen is used for combustion instead of air, which results in a flue gas that consists mainly of pure CO2 and is potentially suitable for storage. In post combustion capture, CO2 is captured from the flue gas obtained after the combustion of fossil fuel. The post combustion capture (PCC) method eliminates the need for substantial modifications to existing combustion processes and facilities; hence, it provides a means for near-term CO2 capture for new and existing stationary fossil fuel-fired power plants. This paper briefly reviews CO2 capture methods, classifies existing and emerging post combustion CO2 capture technologies and compares their features. The paper goes on to investigate relevant studies on carbon fibre composite adsorbents for CO2 capture, and discusses fabrication parameters of the adsorbents and their CO2 adsorption performance in detail. The paper then addresses possible future system configurations of this process for commercial applications. Finally, while there are many inherent attractive features of flow-through channelled carbon fibre monolithic adsorbents with very high CO2 adsorption capabilities, further work is required for them to be fully evaluated for their potential for large scale CO2 capture from fossil fuel-fired power stations. Crown Copyright (C) 2009 Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:438 / 455
页数:18
相关论文
共 166 条
[1]   EFFECT OF THE ACTIVATING GAS ON TENSILE-STRENGTH AND PORE STRUCTURE OF PITCH-BASED CARBON-FIBERS [J].
ALCANIZMONGE, J ;
CAZORLAAMOROS, D ;
LINARESSOLANO, A ;
YOSHIDA, S ;
OYA, A .
CARBON, 1994, 32 (07) :1277-1283
[2]  
AN H, 2007, 6 INT S COAL COMB WU
[3]  
[Anonymous], 2002, Energy and Poverty, World Energy Outlook 2002
[4]  
Axel F., 1999, REINF PLAST, V43, P24
[5]  
Bagley R.D., 1974, U.S. Patent, Patent No. [3790654, US3790654A]
[6]   Removal of CO2 greenhouse gas by ammonia scrubbing [J].
Bai, HL ;
Yeh, AC .
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 1997, 36 (06) :2490-2493
[7]   High-throughput synthesis of zeolitic imidazolate frameworks and application to CO2 capture [J].
Banerjee, Rahul ;
Phan, Anh ;
Wang, Bo ;
Knobler, Carolyn ;
Furukawa, Hiroyasu ;
O'Keeffe, Michael ;
Yaghi, Omar M. .
SCIENCE, 2008, 319 (5865) :939-943
[8]  
Bansal R.C., 1988, ACTIVE CARBON
[9]  
BAYLESS DJ, 2001, P 1 NAT C CARB SEQ, P1
[10]  
Beecy D.J., 2001, ENV GEOSCIENCES, V8, P152