Composition-dependent ferroelectric properties of Ba1-xSrxTiO3 ceramics

Pure and homogeneous nanopowders of Ba1-xSrxTiO3 with compositions x 0, 0.10, 0.20, 0.25, 0.30 and 0.35 were prepared by a polymerized complex method based on the Pechini-type reaction route, wherein mixed solutions of citric acid, ethylene glycol, titanium isopropoxide, barium carbonate and strontium carbonate were polymerized to form transparent resins used as precursors for the final oxide powders. X-ray diffraction data indicated the formation of tetragonal BaTiO3 and cubic (Ba, Sr) TiO3 solid solutions, free from secondary phases. Ceramics with relative densities of 85 - 93% were obtained after sintering for 3 h at 1300 degrees C and 1350 degrees C, respectively. The Sr content influences the microstructure of the ceramic samples and their ferroelectric characteristics. The P(E) loops are strongly composition-dependent, with reducing the remnant polarization and coercive fields with increasing the Sr addition. The First Order Reversal Curve (FORC) analysis is used for describing the local switching properties and the ac-tunability characteristics. The maximum of the FORC distribution is located at low fields, meaning that small fields are necessary to switch the large majority of the domains of these systems. The tunability determined in the FORC experiment depends not only on the actual field, but also on the reversal field. For two compositions, higher FORC tunability at room temperature was found for the sample closer to its ferro-para phase transition. This result was interpreted in relationship with the domain walls mobility, which is higher for the ferroelectric sample close to its ferro-para phase transition.