Diffusion bonding technology of a titanium alloy to a stainless steel web with an Ni interlayer

被引：191

作者：

He, P ^{[1
]}

Zhang, JH ^{[1
]}

Zhou, RL ^{[1
]}

Li, XQ ^{[1
]}

机构：

[1] HIT00, Natl Key Lab Adv Welding Prod Technol, Harbin 150001, Peoples R China

来源：

MATERIALS CHARACTERIZATION | 1999年 / 43卷 / 05期

关键词：

D O I：

10.1016/S1044-5803(99)00008-X

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The probability and appropriate processing parameters for diffusion bonding of a titanium alloy to a stainless steel web with an Ni interlayer have been investigated. The microstructure of the diffusion bonding joint has been observed by microscopy, SEM, and EPMA, and the main factors affecting diffusion bonding have been analyzed. The results show that atom diffusion and migration between Ti and Fe or C are effectively prevented by adding pure Ni as the interlayer metal, and a firm joint is obtained. When products were diffusion bonded, the relationship of exerting pressure and deformation is analyzed. A method of controlling deformation and attaining nondeformation bonding has been proposed. The optimum parameters are as follows: bond temperature is 850 degrees C, bond-specific stress is 10MPa bond time is 10-15 min, and difference between ring-shaped bonding area radii D-d is 1-1.5mm. (C) Elsevier Science Inc., 1999. All rights reserved.

引用

页码：287 / 292

页数：6

共 7 条

[1] ALEMAN B, 1993, MATER SCI TECH SER, V9, P633, DOI 10.1179/026708393790172376
[2] REACTIVE DIFFUSION BETWEEN TITANIUM AND STAINLESS-STEEL
BHANUMURTHY, K
KALE, GB
[J]. JOURNAL OF MATERIALS SCIENCE LETTERS, 1993, 12 (23) : 1879 - 1881
[3] CHEN CC, 1980, TITANIUM 80, V4, P2379
[4] HAMILTON CH, 1983, CONTINUING INNOVATIO, P1166
[5] HIGHBERGER WT, 1980, MATERIALS, P539
[6] KAMAT GR, 1988, WELD J, V67, P44
[7] DIFFUSION WELDING OF TI/TI AND TI/STAINLESS STEEL RODS UNDER PHASE-TRANSFORMATION IN AIR
KATO, H
SHIBATA, M
YOSHIKAWA, K
[J]. MATERIALS SCIENCE AND TECHNOLOGY, 1986, 2 (04) : 405 - 409

← 1 →