Wear behaviour of thermally sprayed ceramic oxide coatings

被引：208

作者：

Bolelli, Giovanni ^{[1
]}

Cannillo, Valeria ^{[1
]}

Lusvarghi, Luca ^{[1
]}

Manfredini, Tiziano ^{[1
]}

机构：

[1] Univ Modena & Reggio Emilia, Dipartimento Ingn Mat Ambiente, I-41100 Modena, Italy

来源：

WEAR | 2006年 / 261卷 / 11-12期

关键词：

sliding wear; abrasive wear; plasma spraying; ceramic coatings; friction coefficient;

D O I：

10.1016/j.wear.2006.03.023

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The wear resistance of plasma-sprayed ceramic coatings (Al2O3, Al2O3-13%TiO2, Cr2O3) has been investigated through pin-on-disk and dry sand-steel wheel tests, has been correlated to microstructural and micromechanical characteristics (microhardness, fracture toughness) and has been compared to well-known platings (such as Cr electroplating and electroless Ni) and HVOF-sprayed cermets (WC-17%Co, WC-10%Co-4%Cr). Plasma-sprayed ceramics are hard but brittle: dry particles abrasion occurs through splats detachment. The toughest coating (Al2O3) displays the highest wear resistance, which in fact overcomes HVOF-sprayed cermets and Cr electroplating, when a low number of wheel revolutions are considered. In pin-on-disk tests, no coating undergoes wear loss against the 100Cr6 ball, that possess lower hardness. Against the alumina ball, Al2O3 and Al2O3-TiO2. coatings show high wear rates and friction coefficients (due to chemical affinity), while Cr2O3 possesses better wear resistance, lower friction coefficient and inflicts less wear on the counterpart. Cr2O3 wear scar consists in plastically deformed splats and debris forming a quite adherent protective tribofilm. (c) 2006 Elsevier B.V. All rights reserved.

引用

页码：1298 / 1315

页数：18

共 57 条

[1] Wear map of ceramics [J].

Adachi, K ;

Kato, K ;

Chen, N .

WEAR, 1997, 203 :291-301

[2] Tribological behaviour of plasma-sprayed chromium oxide coating [J].

Ahn, HS ;

Kwon, OK .

WEAR, 1999, 225 :814-824

[3] Instrumented spherical micro-indentation of plasma-sprayed coatings [J].

Alcalá, J ;

Gaudette, F ;

Suresh, S ;

Sampath, S .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 316 (1-2) :1-10

[4] Advanced thermal spray technology and coating for lightweight engine blocks for the automotive industry [J].

Barbezat, G .

SURFACE & COATINGS TECHNOLOGY, 2005, 200 (5-6) :1990-1993

[5]

BHUSHAN B, 1999, PRINCIPLES APPL TRIB, P509

[6] Microstructural investigation of plasma-sprayed ceramic splats [J].

Bianchi, L ;

Denoirjean, A ;

Blein, F ;

Fauchais, P .

THIN SOLID FILMS, 1997, 299 (1-2) :125-135

[7] Mechanical and tribological properties of electrolytic hard chrome and HVOF-sprayed coatings [J].

Bolelli, G ;

Cannillo, V ;

Lusvarghi, L ;

Riccò, S .

SURFACE & COATINGS TECHNOLOGY, 2006, 200 (09) :2995-3009

[8]

BOLELLI G, 2004, 30 C NAZ AIM VIC IT

[9]

BUDINSKY KG, 1995, WEAR, V181, P938

[10]

Dorfman MR, 2002, ADV MATER PROCESS, V160, P49

← 1 2 3 4 5 6 →