The cracking mechanism of silicon particles in an A357 aluminum alloy

被引：125

作者：

Yeh, JW ^{[1
]}

Liu, WP ^{[1
]}

机构：

[1] CHENGSHIU JR COLL TECHNOL & COMMERCE,DEPT MECH ENGN,KAOHSIUNG 83305,TAIWAN

来源：

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 1996年 / 27卷 / 11期

关键词：

D O I：

10.1007/BF02595447

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The cracking of Si particles in an A357 Al alloy has been investigated over a spectrum of stress and strain by varying aging strength and applying different tensile strains. The variation of the fraction of broken Si particles with stress, strain, and cleavage plane orientation has been obtained. The features of cracking reveal that cracking of Si particles is a very localized event. A dislocation pileup mechanism is the most probable one among all crack-initiation theories for explaining the behavior. Based on this mechanism, further deduction has been made to obtain the relationship between the fraction of broken particles and metallurgical factors. The present data, along with Gurland's and that of Low et al., have been found to verify this relationship for the effect of stress, strain, and cleavage plane orientation.

引用

页码：3558 / 3568

页数：11

共 24 条

[1] CAVITY FORMATION FROM INCLUSIONS IN DUCTILE FRACTURE [J].

ARGON, AS ;

IM, J ;

SAFOGLU, R .

METALLURGICAL TRANSACTIONS, 1975, A 6 (04) :825-837

[2] WORK HARDENING OF DISPERSION-HARDENED CRYSTALS [J].

ASHBY, MF .

PHILOSOPHICAL MAGAZINE, 1966, 14 (132) :1157-&

[3] WORK-HARDENING OF COPPER-SILICA .5. EQUILIBRIUM PLASTIC RELAXATION BY SECONDARY DISLOCATIONS [J].

BROWN, LM ;

STOBBS, WM .

PHILOSOPHICAL MAGAZINE, 1976, 34 (03) :351-372

[4] INVESTIGATION OF PLASTIC FRACTURE OF ALSL-4340 AND 18 NICKEL-200 GRAE MARAGING STEELS [J].

COX, TB ;

LOW, JR .

METALLURGICAL TRANSACTIONS, 1974, 5 (06) :1457-1470

[5]

EDELSON BI, 1962, T ASM, V55, P230

[6]

GANGULEE A, 1967, T METALL SOC AIME, V239, P269

[7] OBSERVATIONS ON FRACTURE OF CEMENTITE PARTICLES IN A SPHEROIDIZED 1.05 PERCENT C STEEL DEFORMED AT ROOM-TEMPERATURE [J].

GURLAND, J .

ACTA METALLURGICA, 1972, 20 (05) :735-&

[8]

Gurland J., 1963, T ASM, V56, P442

[9] METALLURGICAL FACTORS AFFECTING FRACTURE TOUGHNESS OF ALUMINUM-ALLOYS [J].

HAHN, GT ;

ROSENFIELD, AR .

METALLURGICAL TRANSACTIONS, 1975, A 6 (04) :653-668

[10]

HERTZBERG RW, 1989, DEFORMATION FRACTURE, P239

← 1 2 3 →