Analytical models for high performance milling. Part II: Process dynamics and stability

被引：63

作者：

Budak, E. ^{[1
]}

机构：

[1] Sabanci Univ, Fac Engn & Nat Sci, Istanbul, Turkey

来源：

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 2006年 / 46卷 / 12-13期

关键词：

D O I：

10.1016/j.ijmachtools.2005.09.010

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Chatter is one of the most important limitations on the productivity of milling process. In order to avoid the poor surface quality and potential machine damage due to chatter, the material removal rate is usually reduced. The analysis and modeling of chatter is complicated due to the time varying dynamics of milling chatter which can be avoided without sacrificing the productivity by using analytical methods presented in this paper. (C) 2005 Elsevier Ltd. All rights reserved.

引用

页码：1489 / 1499

页数：11

共 30 条

[1] Analytical prediction of stability lobes in ball end milling [J].

Altintas, Y ;

Shamoto, E ;

Lee, P ;

Budak, E .

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 1999, 121 (04) :586-592

[2] Analytical prediction of three dimensional chatter stability in milling [J].

Altintas, Y .

JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING, 2001, 44 (03) :717-723

[3]

Altintas Y, 1999, J MANUF SCI E-T ASME, V121, P173

[4]

Altintas Y, 2000, MANUFACTURING AUTOMA

[5]

Altintas Y., 1995, ANN CIRP, V44, P357, DOI [DOI 10.1016/S0007-8506(07)62342-7, 10.1016/S0007-8506(07)62342-7]

[6] Analytical prediction of chatter stability in milling - Part 1: General formulation [J].

Budak, E ;

Altintas, Y .

JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 1998, 120 (01) :22-30

[7] Maximizing chatter free material removal rate in milling through optimal selection of axial and radial depth of cut pairs [J].

Budak, E ;

Tekeli, A .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2005, 54 (01) :353-356

[8] An analytical design method for milling cutters with nonconstant pitch to increase stability, part 1: Theory [J].

Budak, E .

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2003, 125 (01) :29-34

[9]

BUDAK E, INT J MACH TOOL MANU, DOI DOI 10.1016/J.MACHTOOLS.2005.09.009

[10]

Budak E., 1994, THESIS U BRIT COLUMB

← 1 2 3 →